SIMPLE SOLUTIONS

IF_SMSC(4FREEBSD) - Linux man page online | Special files

USB SMSC LAN9xxx Fast Ethernet driver.

Chapter
November 24, 2015
SMSC(4) BSD Kernel Interfaces Manual SMSC(4)

NAME

smsc — USB SMSC LAN9xxx Fast Ethernet driver

SYNOPSIS

To load the driver as a module at boot time, place the following line in loader.conf(5): if_smsc_load="YES" Alternatively, to compile this driver into the kernel, place the following lines in your kernel configuration file: device uhci device ohci device usb device miibus device uether device smsc

DESCRIPTION

The smsc device driver provides support for USB Fast Ethernet adapters based on the SMSC LAN9xxx chipsets. For more information on configuring this device, see ifconfig(8).

HARDWARE

The following devices are supported by the smsc driver: · SMSC LAN9500, LAN9500A, LAN9505 and LAN9505A based Ethernet adapters · SMSC LAN89530, LAN9530 and LAN9730 based Ethernet adapters · SMSC LAN951x Ethernet adapters with integrated USB hub

SEE ALSO

arp(4), intro(4), miibus(4), netintro(4), usb(4), ifconfig(8)

HISTORY

The smsc device driver first appeared in FreeBSD 10.0.

AUTHORS

The smsc driver was written by Ben Gray <@FreeBSD.org>.
BSD November 24, 2015 BSD
This manual Reference Other manuals
if_smsc(4freebsd) referred by
refer to arp(4freebsd) | ifconfig(8) | intro(4) | miibus(4freebsd) | netintro(4freebsd) | smsc(4freebsd) | usb(4freebsd)
Download raw manual
Main page BSD Kernel Interfaces Manual (+773) BSD (+3984) № 4 (+981)
Go top