SIMPLE SOLUTIONS

IF_UDAV(4FREEBSD) - man page online | special files

Davicom DM9601 USB Ethernet driver.

Chapter
July 16, 2005
UDAV(4)                            BSD Kernel Interfaces Manual                           UDAV(4)

NAME

udav — Davicom DM9601 USB Ethernet driver

SYNOPSIS

To compile this driver into the kernel, place the following lines in your kernel configura‐ tion file: device ehci device uhci device ohci device usb device miibus device udav Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): if_udav_load="YES"

HARDWARE

The udav driver supports the following adapters: · Corega FEther USB-TXC · ShanTou ST268 USB NIC

DESCRIPTION

The udav driver provides support for USB Ethernet adapters based on the Davicom DM9601 chipset. For more information on configuring this device, see ifconfig(8).

SEE ALSO

altq(4), arp(4), miibus(4), netintro(4), ng_ether(4), usb(4), ifconfig(8) Davicom DM9601 data sheet, http://ptm2.cc.utu.fi/ftp/network/cards/DM9601/From_NET/DM9601-DS-P01-930914.pdf.

HISTORY

The udav device driver first appeared in NetBSD 2.0.

AUTHORS

The udav driver was written by Shingo WATANABE <@nabechan.org>.
BSD July 16, 2005 BSD
This manual Reference Other manuals
if_udav(4freebsd) referred by
refer to arp(4freebsd) | ifconfig(8) | miibus(4freebsd) | netintro(4freebsd) | ng_ether(4freebsd) | udav(4freebsd) | usb(4freebsd)