SIMPLE SOLUTIONS

JACK-SCOPE(1) - man page online | user commands

JACK Oscilloscope.

Chapter
02/06/2016
JACK-SCOPE(1)                                                                       JACK-SCOPE(1)

NAME

jack-scope - JACK Oscilloscope

SYNOPSIS

jack-scope [options]

OPTIONS

-b : Set the frame size of the data displayed by the scope (default=512). -d : Set the delay interval in milli-seconds between scope updates (default=100.0). -f : Request that a still image file of each frame be stored to the indicated directory. -m : Set the scope operating mode (default=signal). The operating modes are: signal and embed. -n : Set the number of channels, and therefore the number of JACK input ports (default=1). Multiple channels are superimposed, each channel is drawn in a distinct color. There is a compile time channel limit. -p : A pattern describing the JACK ports to connect to, ie. SuperCollider:out_%d (default=nil). If this is not set consults the environment variable JACK_SCOPE_CONNECT_TO. -u : Set the UDP port number to listen for OSC packets on (default=57140). -w : Set the scope size in pixels (default=512). The scope window is square.

DESCRIPTION

jack-scope is an oscilloscope for JACK under X11. jack-scope draws either a time domain signal trace or a self correlation trace. Multiple input channels are superimposed, each channel is drawn in a different color. jack-scope accepts OSC packets for interactive control of drawing parameters. The operating mode of jack-scope is set using -m. In signal mode jack-scope draws a time domain signal trace, in embed mode jack-scope draws a self correlation trace. The size of the jack-scope window is set using -w, the scope window is square. The window is of fixed size and has centered gravity. The time interval that is displayed is determined by the frame size, set using -b. The image refresh rate is determined by the delay interval, set using -d. Note that the interval is truncated to the nearest frame boundary and that the time taken to compose the image and blit to the screen is indeterminate. The number of JACK input ports that jack-scope creates and monitors is set using -n. Multiple channels are drawn in superimposition, each channel is drawn in a distinct color. In signal mode the trace is drawn in a style set using /style. In dot mode only the sample pixel in each column is drawn. In fill mode all pixels between the sample pixel and the zero pixel of each column are drawn. In line mode all pixels between the adjacent sample pixels of each column are drawn. In embed mode the trace is a self correlation signal with a sample delay set using /embed. The delayed sample is on the x-axis. The interpolation increment is set using /incr, increment values less than one result in increasingly continuous trace paths. jack-scope can store the animation as a sequence of uncompressed ppm(5) image files. To request this use the -f option with the directory files should be written to as the argument. The OSC messages understood by jack-scope are given in the table below. Each command requires one argument of the indicated type. The last column gives the option that sets the same parameter. Command Description Argument Option ------- ----------- -------- ------ /mode drawing-mode string -m /style style string N/A /frames frame-size integer -b /delay refresh-interval float -d /embed embedding integer N/A /incr increment float N/A jack-scope implements no connection logic, use jack-plumbing(1) instead.

REFERENCES

Monro, G. and Pressing, J. ‘‘Sound Visualization Using Embedding: The Art and Science of Auditory Autocorrelation’’ CMJ, 22/2, 1998.

AUTHOR

Rohan Drape http://rd.slavepianos.org/

SEE ALSO

jackd(1), X(7x), OSC(7) http://opensoundcontrol.org/

AUTHOR

Rohan Drape <@slavepianos.org> Author.
02/06/2016 JACK-SCOPE(1)
This manual Reference Other manuals
jack-scope(1) referred by
refer to jack-plumbing(1) | jackd(1) | ppm(5) | X(7)