SIMPLE SOLUTIONS

KMO_SHIFT(7) - Linux man page online | Overview, conventions, and miscellany

Shift a cube spatially.

Chapter
1.4.3
KMO_SHIFT(7) kmos recipes KMO_SHIFT(7)

NAME

kmo_shift - Shift a cube spatially

SYNOPSIS

esorex kmo_shift [OPTIONS] FILE.sof

DESCRIPTION

This recipe shifts a cube spatially. A positive x-shift shifts the data to the left, a positive y-shift shifts upwards, where a shift of one pixel equals 0.2arcsec. The output will still have the same dimensions, but the borders will be filled with NaNs accordingly. To adjust only the WCS without moving the data the --wcs-only parameter has to be set to TRUE. The WCS is updated in the same way as if the data would have moved as well. This means that the point at (x,y) has the same coordinates as the point (x+1,y+1) after updat‐ ing the WCS (the WCS moved in the opposite direction). BASIC PARAMETERS --shifts This parameter must be supplied. It contains the amount of shift to apply. The unit is in arcsec. If the --shifts parameter contains only two values (x,y), all IFUs will be shifted by the same amount. If it contains 48 values (x1,y1;x2,y2;...;x24,y24), the IFUs are shifted individually. --imethod The interpolation method to apply when the shift value isn’t a multiple of the pixel scale. There are two methods available: * BCS: Bicubic spline * NN: Nearest Neighbor --ifu If a single IFU should be shifted, it can be defined using the --ifu parameter (--shifts parameter contains only two values). ADVANCED PARAMETERS --flux Specify if flux conservation should be applied. --extrapolate By default no extrapolation is applied. This means that the output frame will shrink at most one pixel, because the data is shifted out of the frame. When turning extrapolation on, the size of the output frame stays the same as for the input frame. --wcs-only By default data and WCS are shifted in sync. If this parameter is set to TRUE only the WCS is updated (i.e. if someone thinks that the IFU isn´t pointing exactly to the correct coordinates.) Input files: DO KMOS category Type Explanation Required #Frames -------- ----- ----------- -------- ------- <none or any> F3I data frame Y 1 Output files: DO KMOS category Type Explanation -------- ----- ----------- SHIFT F3I Shifted data cube

OPTIONS

--imethod <str> Method to use for interpolation. ["BCS" (bicubic spline, default), "NN" (nearest neighbor)] (str; default: ´BCS´). The full name of this option for the EsoRex con‐ figuration file is kmos.kmo_shift.imethod [default = BCS]. --extrapolate <bool> Applies only to ´method=BCS´ when doing sub-pixel shifts: FALSE: shifted IFU will be filled with NaN´s at the borders,TRUE: shifted IFU will be extrapolated at the borders (bool; default: False). The full name of this option for the EsoRex config‐ uration file is kmos.kmo_shift.extrapolate [default = False]. --shifts <str> The shifts for each spatial dimension for all specified IFUs."x1,y1;x2,y2;..." (arcsec) (str; default: ´´). The full name of this option for the EsoRex configura‐ tion file is kmos.kmo_shift.shifts [default = ]. --ifu <long> The IFU to shift [1 to 24] or shift all IFUs Default value of 0 applies shift to all IFUs. (long; default: 0). The full name of this option for the EsoRex configu‐ ration file is kmos.kmo_shift.ifu [default = 0]. --flux <bool> Apply flux conservation: (TRUE (apply) or FALSE (don´t apply) (bool; default: False). The full name of this option for the EsoRex configuration file is kmos.kmo_shift.flux [default = False]. --wcs-only <bool> FALSE: if data and wcs should be updated.TRUE: if only wcs should be corrected (bool; default: False). The full name of this option for the EsoRex configuration file is kmos.kmo_shift.wcs-only [default = False]. Note that it is possible to create a configuration file containing these options, along with suitable default values. Please refer to the details provided by the 'esorex --help' command.

SEE ALSO

The full documentation for the kmos pipeline can be downloaded as a PDF file using the following URL: ftp://ftp.eso.org/pub/dfs/pipelines/kmos/kmos-pipeline-manual-2.9.pdf An overview over the existing ESO pipelines can be found on the web page http://www.eso.org/sci/software/pipelines/. Basic documentation about the EsoRex program can be found at the esorex (1) man page. It is possible to call the pipelines from python using the python-cpl package. See http://packages.python.org/python-cpl/index.html for further information. The other recipes of the kmos pipeline are kmo_arithmetic(7), kmo_copy(7), kmo_fit_pro‐ file(7), kmo_fits_strip(7), kmo_make_image(7), kmo_noise_map(7), kmo_rotate(7), kmo_sky_mask(7), kmo_stats(7), kmos_combine(7), kmos_dark(7), kmos_extract_spec(7), kmos_flat(7), kmos_gen_reflines(7), kmos_gen_telluric(7), kmos_illumination(7), kmos_reconstruct(7), kmos_sci_red(7), kmos_sky_tweak(7), kmos_std_star(7), kmos_test(7), kmos_wave_cal(7)

VERSION

kmo_shift 1.4.3

AUTHOR

Alex Agudo Berbel <@eso.org>

BUG REPORTS

Please report any problems to @eso.org. Alternatively, you may send a report to the ESO User Support Department <@eso.org>.

LICENSE

This file is part of the CRIRES Instrument Pipeline Copyright (C) 2002,2003 European Southern Observatory This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either ver‐ sion 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
kmo_shift 1.4.3 KMO_SHIFT(7)
This manual Reference Other manuals
kmo_shift(7) referred by kmo_arithmetic(7) | kmo_copy(7) | kmo_fit_profile(7) | kmo_fits_strip(7) | kmo_make_image(7) | kmo_noise_map(7) | kmo_rotate(7) | kmo_sky_mask(7) | kmo_stats(7) | kmos_combine(7) | kmos_dark(7) | kmos_extract_spec(7) | kmos_flat(7) | kmos_gen_reflines(7) | kmos_gen_telluric(7) | kmos_illumination(7) | kmos_reconstruct(7) | kmos_sci_red(7) | kmos_sky_tweak(7) | kmos_std_star(7)
refer to kmo_arithmetic(7) | kmo_copy(7) | kmo_fits_strip(7) | kmo_make_image(7) | kmo_noise_map(7) | kmo_rotate(7) | kmo_sky_mask(7) | kmo_stats(7) | kmos_combine(7) | kmos_dark(7) | kmos_extract_spec(7) | kmos_flat(7) | kmos_gen_reflines(7) | kmos_gen_telluric(7) | kmos_illumination(7) | kmos_reconstruct(7) | kmos_sci_red(7) | kmos_sky_tweak(7) | kmos_std_star(7) | kmos_test(7)
Download raw manual
Main page kmos recipes (+23) kmo_shift (+1) № 7 (+1560)
Go top