SIMPLE SOLUTIONS

LOCON(3) - Linux man page online | Library functions

Mbk logical connector.

Chapter
October 1, 1997
LOCON(3) MBK LOGICAL STRUCTURE DEFINITIONS LOCON(3)

NAME

locon - mbk logical connector

DESCRIPTION

The locon is used to describe a connector of the logical view of a figure. Connectors are describing the cell interface, and are the link between its physical and logical views, so the names must be the same. The declarations needed to work on locon are available in the header file "/labo/include/mlo404.h", where '404' is the actual mbk version. The following C structure supports the description of the logical connector : typedef struct locon { struct locon ∗NEXT; char ∗NAME; struct losig ∗SIG; void ∗ROOT; char DIRECTION; char TYPE; struct ptype ∗USER; } locon_list; NEXT Pointer to the next locon of the list. NAME Name of the connector. It identifies the connector, so it should unique in a given logical figure. A logical connector with a given name correspond to the physical connector or connectors of this name. SIG Pointer to the signal linked to the connector. This signal is, of course, unique. See losig(3) for details. ROOT Pointer to the object it belongs to. This object may be either a lofig, or a loins, depending on the type of the connector. See lofig(3) and loins for details. DIRECTION This indicates the way of the information going through the connector. Six directions are legal : IN input OUT output INOUT input and output UNKNOWN no information is available TRISTATE tristate output TRANSCV tristate output and input TYPE Character indicating if the connector belongs to a model or an instance. It can take two values : EXTERNAL for figure connectors INTERNAL for instance connectors The TYPE is needed to appropriatly cast the ROOT field, and must be approriatly filled by the parsers. A misuse of it may cause strange behaviours. USER Pointer to a ptype list, see ptype for details, that is a general pur‐ pose pointer used to share informations on the connector.

SEE ALSO

mbk(1), mbk(3), addlocon(3), getlocon(3), dellocon(3), losig(3), ptype(3), loins(3), lofig(3).
ASIM/LIP6 October 1, 1997 LOCON(3)
This manual Reference Other manuals
locon(3) referred by addlocap(3) | addlocon(3) | addlores(3) | addloself(3) | addlotrs(3) | addphcon(3) | checkloconorder(3) | dellocon(3) | GENLIB_BUS(3) | GENLIB_ELM(3) | getlocon(3) | guessextdir(3) | locap(3) | lofig(3) | lofigchain(3) | loins(3) | lores(3) | loself(3) | losig(3) | lotrs(3)
refer to addlocon(3) | dellocon(3) | getlocon(3) | lofig(3) | loins(3) | losig(3) | mbk(3) | ptype(3)
Download raw manual
Index MBK LOGICAL STRUCTURE DEFINITIONS (+8) ASIM/LIP6 (+480) № 3 (+68044)
Go top