MKFS.F2FS(8) - Linux man page online | Administration and privileged commands

Create an F2FS file system.

MKFS.F2FS(8) System Manager's Manual MKFS.F2FS(8)


mkfs.f2fs - create an F2FS file system


mkfs.f2fs [ -a heap-based-allocation ] [ -c device ] [ -d debugging-level ] [ -e exten‐ sion-list ] [ -f ] [ -l volume-label ] [ -m ] [ -o overprovision-ratio-percentage ] [ -O feature-list ] [ -q ] [ -s #-of-segments-per-section ] [ -t nodiscard/discard ] [ -w spe‐ cific sector_size for target sectors ] [ -z #-of-sections-per-zone ] device [sectors]


mkfs.f2fs is used to create a f2fs file system (usually in a disk partition). device is the special file corresponding to the device (e.g. /dev/sdXX). sectors is optionally given for specifing the filesystem size. The exit code returned by mkfs.f2fs is 0 on success and 1 on failure.


-a heap-based-allocation Specify 1 or 0 to enable/disable heap based block allocation policy. If the value is equal to 1, each of active log areas are initially assigned separately according to the whole volume size. The default value is 1. -c device Build f2fs with this device additionally, so that user can see all the devices as one big volume. -d debug-level Specify the level of debugging options. The default number is 0, which shows basic debugging messages. -e extension-list Specify a file extension list in order f2fs to treat them as cold files. The data of files having those extensions will be stored to the cold log. The default list includes most of multimedia file extensions such as jpg, gif, mpeg, mkv, and so on. -f Force overwrite when an existing filesystem is detected on the device. By default, mkfs.f2fs will not write to the device if it suspects that there is a filesystem or partition table on the device already. -l volume-label Specify the volume label to the partition mounted as F2FS. -m Specify f2fs filesystem to supports the block zoned feature. Without it, the filesystem isn't supports the feature. -o overprovision-ratio-percentage Specify the percentage over the volume size for overprovision area. This area is hidden to users, and utilized by F2FS cleaner. If not specified, the best number will be assigned automatically accoring to the partition size. -O feature-list Specify a feature list in order f2fs filesystem will supports. e.g "encrypt" and so on. -q Quiet mode. With it, mkfs.f2fs does not show any messages include the basic mes‐ sages. -s #-of-segments-per-section Specify the number of segments per section. A section consists of multiple consecu‐ tive segments, and is the unit of garbage collection. The default number is 1, which means one segment is assigned to a section. -t nodiscard/discard Specify 1 or 0 to enable/disable discard policy. If the value is equal to 1, dis‐ card policy is enabled, otherwise is disable. The default value is 1. -wsector-size Specify the sector size in bytes along with given target sectors. Without it, the sectors will be calculated by device sector size. -z #-of-sections-per-zone Specify the number of sections per zone. A zone consists of multiple sections. F2FS allocates segments for active logs with separated zones as much as possible. The default number is 1, which means a zone consists of one section. AUTHOR This version of mkfs.f2fs has been written by Jaegeuk Kim <‐>.


mkfs.f2fs is available from git:// tools.git.


mkfs(8), fsck.f2fs(8), dump.f2fs(8), defrag.f2fs(8), resize.f2fs(8), sload.f2fs(8).
This manual Reference Other manuals
mkfs.f2fs(8) referred by defrag.f2fs(8) | dump.f2fs(8) | f2fscrypt(8) | fsck.f2fs(8) | resize.f2fs(8) | sload.f2fs(8)
refer to defrag.f2fs(8) | dump.f2fs(8) | fsck.f2fs(8) | mkfs(8) | resize.f2fs(8) | sload.f2fs(8)
Download raw manual
Main page System Manager's Manual (+2060) № 8 (+5755)
Go top