QMQPD(8POSTFIX) - Linux man page online | Administration and privileged commands
Postfix QMQP server.
NAMEqmqpd - Postfix QMQP server
SYNOPSISqmqpd [generic Postfix daemon options]
DESCRIPTIONThe Postfix QMQP server receives one message per connection. Each message is piped through the cleanup(8) daemon, and is placed into the incoming queue as one single queue file. The program expects to be run from the master(8) process manager. The QMQP server implements one access policy: only explicitly authorized client hosts are allowed to use the service.
SECURITYThe QMQP server is moderately security-sensitive. It talks to QMQP clients and to DNS servers on the network. The QMQP server can be run chrooted at fixed low privilege.
DIAGNOSTICSProblems and transactions are logged to syslogd(8).
BUGSThe QMQP protocol provides only one server reply per message delivery. It is therefore not possible to reject individual recipients. The QMQP protocol requires the server to receive the entire message before replying. If a message is malformed, or if any netstring component is longer than acceptable, Postfix replies immediately and closes the connection. It is left up to the client to handle the situation.
CONFIGURATION PARAMETERSChanges to main.cf are picked up automatically, as qmqpd(8) processes run for only a lim‐ ited amount of time. Use the command "postfix reload" to speed up a change. The text below provides only a parameter summary. See postconf(5) for more details includ‐ ing examples.
CONTENT INSPECTION CONTROLScontent_filter (empty) After the message is queued, send the entire message to the specified trans‐ port:destination. receive_override_options (empty) Enable or disable recipient validation, built-in content filtering, or address map‐ ping.
SMTPUTF8 CONTROLSPreliminary SMTPUTF8 support is introduced with Postfix 3.0. smtputf8_enable (yes) Enable preliminary SMTPUTF8 support for the protocols described in RFC 6531..6533. smtputf8_autodetect_classes (sendmail, verify) Detect that a message requires SMTPUTF8 support for the specified mail origin classes. Available in Postfix version 3.2 and later: enable_idna2003_compatibility (no) Enable 'transitional' compatibility between IDNA2003 and IDNA2008, when converting UTF-8 domain names to/from the ASCII form that is used for DNS lookups.
RESOURCE AND RATE CONTROLSline_length_limit (2048) Upon input, long lines are chopped up into pieces of at most this length; upon delivery, long lines are reconstructed. hopcount_limit (50) The maximal number of Received: message headers that is allowed in the primary message headers. message_size_limit (10240000) The maximal size in bytes of a message, including envelope information. qmqpd_timeout (300s) The time limit for sending or receiving information over the network.
TROUBLE SHOOTING CONTROLSdebug_peer_level (2) The increment in verbose logging level when a remote client or server matches a pattern in the debug_peer_list parameter. debug_peer_list (empty) Optional list of remote client or server hostname or network address patterns that cause the verbose logging level to increase by the amount specified in $debug_peer_level. soft_bounce (no) Safety net to keep mail queued that would otherwise be returned to the sender.
TARPIT CONTROLSqmqpd_error_delay (1s) How long the Postfix QMQP server will pause before sending a negative reply to the remote QMQP client.
MISCELLANEOUS CONTROLSconfig_directory (see 'postconf -d' output) The default location of the Postfix main.cf and master.cf configuration files. daemon_timeout (18000s) How much time a Postfix daemon process may take to handle a request before it is terminated by a built-in watchdog timer. ipc_timeout (3600s) The time limit for sending or receiving information over an internal communication channel. max_idle (100s) The maximum amount of time that an idle Postfix daemon process waits for an incom‐ ing connection before terminating voluntarily. max_use (100) The maximal number of incoming connections that a Postfix daemon process will ser‐ vice before terminating voluntarily. process_id (read-only) The process ID of a Postfix command or daemon process. process_name (read-only) The process name of a Postfix command or daemon process. qmqpd_authorized_clients (empty) What remote QMQP clients are allowed to connect to the Postfix QMQP server port. queue_directory (see 'postconf -d' output) The location of the Postfix top-level queue directory. syslog_facility (mail) The syslog facility of Postfix logging. syslog_name (see 'postconf -d' output) A prefix that is prepended to the process name in syslog records, so that, for example, "smtpd" becomes "prefix/smtpd". verp_delimiter_filter (-=+) The characters Postfix accepts as VERP delimiter characters on the Postfix send‐ mail(1) command line and in SMTP commands. Available in Postfix version 2.5 and later: qmqpd_client_port_logging (no) Enable logging of the remote QMQP client port in addition to the hostname and IP address. Available in Postfix 3.3 and later: service_name (read-only) The master.cf service name of a Postfix daemon process.
SEE ALSOhttp://cr.yp.to/proto/qmqp.html, QMQP protocol cleanup(8), message canonicalization master(8), process manager syslogd(8), system logging
README FILESUse "postconf readme_directory" or "postconf html_directory" to locate this information. QMQP_README, Postfix ezmlm-idx howto.
LICENSEThe Secure Mailer license must be distributed with this software.
HISTORYThe qmqpd service was introduced with Postfix version 1.1. AUTHOR(S) Wietse Venema IBM T.J. Watson Research P.O. Box 704 Yorktown Heights, NY 10598, USA Wietse Venema Google, Inc. 111 8th Avenue New York, NY 10011, USA
|This manual||Reference||Other manuals|
|qmqpd(8postfix)||referred by||postconf(5) | postfix(1)|
|refer to||cleanup(8postfix) | master(8postfix) | postconf(5) | syslogd(8)|