ABCDE(1) - Linux man page online | User commands

Grab an entire CD and compress it to Ogg/Vorbis, MP3, FLAC, Ogg/Speex, AAC, WavPack, Monkey's Audio.

abcde(1) General Commands Manual abcde(1)


abcde - Grab an entire CD and compress it to Ogg/Vorbis, MP3, FLAC, Ogg/Speex, AAC, Wav‐ Pack, Monkey's Audio (ape), MPP/MP+(Musepack), True Audio (tta) and/or MP2 format.


abcde [options] [tracks]


Ordinarily, the process of grabbing the data off a CD and encoding it, then tagging or commenting it, is very involved. abcde is designed to automate this. It will take an entire CD and convert it into a compressed audio format - Ogg/Vorbis, MPEG Audio Layer III (MP3), Free Lossless Audio Codec (FLAC), Ogg/Speex, MPP/MP+(Musepack), M4A (AAC) wv (Wav‐ Pack), Monkey's Audio (ape), Opus, True Audio (tta) or MPEG Audio Layer II (MP2) for‐ mat(s). With one command, it will: * Do a CDDB or Musicbrainz query over the Internet to look up your CD or use a locally stored CDDB entry, or read CD-TEXT from your CD as a fallback for track information * Download the album art appropriate for your music tracks with many user config‐ urable options for download and post download alterations * Grab an audio track (or all the audio CD tracks) from your CD * Normalize the volume of the individual file (or the album as a single unit) * Compress to Ogg/Vorbis, MP3, FLAC, Ogg/Speex, MPP/MP+(Musepack), M4A, wv (WavPack), Monkey's Audio (ape), Opus format(s) True Audio (tta) and/or MP2, all in one CD read * Comment or ID3/ID3v2 tag * Give an intelligible filename * Calculate replaygain values for the individual file (or the album as a single unit) * Delete the intermediate WAV file (or save it for later use) * Repeat until finished Alternatively, abcde can also grab a CD and turn it into a single FLAC file with an embed‐ ded cuesheet which can be user later on as a source for other formats, and will be treated as if it was the original CD. In a way, abcde can take a compressed backup of your CD col‐ lection.


-1 Encode the whole CD in a single file. The resulting file uses the CD title for tag‐ ging. If the resulting format is a flac file with an embedded cuesheet, the file can be used as a source for creating other formats. Use "-1 -o flac -a default,cue" for obtaining such a file. -a [actions] Comma-delimited list of actions to perform. Can be one or more of: cddb, cue, read, getalbumart, normalize, encode, tag, move, replaygain, playlist, clean. Normalize and encode imply read. Tag implies cddb, read, encode. Move implies cddb, read, encode, tag. Replaygain implies cddb, read, encode, tag and move. Playlist implies cddb. The default is to do all actions except cue, normalize, replaygain, getalbu‐ mart and playlist. -b Enable batch mode normalization. See the BATCHNORM configuration variable. -c [filename] Specifies an additional configuration file to parse. Configuration options in this file override those in /etc/abcde.conf or $HOME/.abcde.conf. -C [discid] Allows you to resume a session for discid when you no longer have the CD available (abcde will automatically resume if you still have the CD in the drive). You must have already finished at least the "read" action during the previous session. -d [devicename | filename] CD-ROM block device that contains audio tracks to be read. Alternatively, a single- track flac file with embedded cuesheet. -D Capture debugging information (you'll want to redirect this - try 'abcde -D 2>log‐ file') -e Erase information about encoded tracks from the internal status file, to enable other encodings if the wav files have been kept. -f Force the removal of the temporary ABCDETEMPDIR directory, even when we have not finished. For example, one can read and encode several formats, including ´.ogg´, and later on execute a ´move´ action with only one of the given formats. On a nor‐ mal situation it would erase the rest of those encoded formats. In this case, abcde will refuse to execute such command, except if -f is used. -g Enable lame's --nogap option. See the NOGAP variable. WARNING: lame's --nogap dis‐ ables the Xing mp3 tag. This tag is required for mp3 players to correctly display track lengths when playing variable-bit-rate mp3 files. -G Download album art using the getalbumart function. This is best done with CDDB‐ METHOD set to musicbrainz and requires the installation of glyrc. ImageMagick is an optional but highly recommended package. Further details of getalbumart can be found in the abcde FAQ document packaged with abcde. -h Get help information. -j [number] Start [number] encoder processes at once. Useful for SMP systems. Overrides the MAXPROCS configuration variable. Set it to "0" when using distmp3 to avoid local encoding processes. -k Keep the wav files after encoding. -l Use the low-diskspace algorithm. See the LOWDISK configuration variable. -L Use a local CDDB repository. See CDDBLOCALDIR variable. -m Create DOS-style playlists, modifying the resulting one by adding CRLF line end‐ ings. Some hardware players insist on having those to work. -n Do not query CDDB database. Create and use a template. Edit the template to provide song names, artist(s), ... -N Non interactive mode. Do not ask anything from the user. Just go ahead. -o [filetype][:filetypeoptions] Select output type. Can be "vorbis" (or "ogg"), "mp3", "flac", "spx", "mpc", "m4a", "wav", "wv", "ape", "opus" or "mka". Specify a comma-delimited list of output types to obtain all specified types. See the OUTPUTTYPE configuration variable. One can pass options to the encoder for a specific filetype on the command line separating them with a colon. The options must be escaped with double-quotes. -p Pads track numbers with 0´s. -P Use Unix PIPES to read and encode in one step (USEPIPES). This disables multiple encodings, since the WAV audio file is never stored in the disc. For more detail on this option see the FAQ document in the source tarball. -r [hosts...] Remote encode on this comma-delimited list of machines using distmp3. See the REMOTEHOSTS configuration variable. -s [fields...] List, separated by commas, the fields to be shown in the CDDB parsed entries. Right now it only uses "year" and "genre". -S [speed] Set the speed of the CD drive. Needs CDSPEED and CDSPEEDOPTS set properly and both the program and device must support the capability. -t [number] Start the numbering of the tracks at a given number. It only affects the filenames and the playlist. Internal (tag) numbering remains the same. -T [number] Same as -t but changes also the internal (tag) numbering. Keep in mind that the default TRACK tag for MP3 is $T/$TRACKS so it is changed to simply $T. -U Set CDDBPROTO to version 5, so that we retrieve ISO-8859-15 encoded CDDB informa‐ tion, and we tag and add comments with Latin1 encoding. -v Show the version and exit -V Be more verbose. On slow networks the CDDB requests might give the sensation noth‐ ing is happening. Add this more than once to make things even more verbose. -x Eject the CD when all tracks have been read. See the EJECTCD configuration vari‐ able. -X [cue2discid] Use an alternative "cue2discid" implementation. The name of the binary must be exactly that. abcde comes with an implementation in python under the examples directory. The special keyword "builtin" forces the usage of the internal (default) implementation in shell script. -w [comment] Add a comment to the tracks ripped from the CD. If you wish to use parentheses, these will need to be escaped. i.e. you have to write "\(" instead of "(". -W [number] Concatenate CD´s. It uses the number provided to define a comment "CD #" and to modify the numbering of the tracks, starting with "#01". For Ogg/Vorbis and FLAC files, it also defines a DISCNUMBER tag. -z DEBUG mode: it will rip, using cdparanoia, the very first second of each track and proceed with the actions requested very quickly, also providing some "hidden" information about what happens on the background. CAUTION: IT WILL ERASE ANY EXIST‐ ING RIPS WITHOUT WARNING! [tracks] A list of tracks you want abcde to process. If this isn't specified, abcde will process the entire CD. Accepts ranges of track numbers - "abcde 1-5 7 9" will process tracks 1, 2, 3, 4, 5, 7, and 9.


Each track is, by default, placed in a separate file named after the track in a subdirec‐ tory named after the artist under the current directory. This can be modified using the OUTPUTFORMAT and VAOUTPUTFORMAT variables in your abcde.conf. Each file is given an exten‐ sion identifying its compression format, 'vorbis' for '.ogg', '.mp3', '.flac', '.spx', '.mpc', '.wav', '.wv', '.ape', '.opus' or '.mka'.


abcde sources two configuration files on startup - /etc/abcde.conf and $HOME/.abcde.conf, in that order. The configuration options stated in those files can be overridden by providing the appro‐ priate flags at runtime. The configuration variables have to be set as follows: VARIABLE=value Except when "value" needs to be quoted or otherwise interpreted. If other variables within "value" are to be expanded upon reading the configuration file, then double quotes should be used. If they are only supposed to be expanded upon use (for exam‐ ple OUTPUTFORMAT) then single quotes must be used. All shell escaping/quoting rules apply. Here is a list of options abcde recognizes: CDDBMETHOD Specifies the method we want to use to retrieve the track information. Two values are recognized: "cddb" and/or "musicbrainz" which can be given as a comma delimited list to be tried sequentially in the event of failure of the first search. The "cddb" value needs the CDDBURL and HELLOINFO variables described below. The "musicbrainz" value uses the Perl helper script abcde-musicbrainz-tool to establish a conversation with the Musicbrainz server for information retrieval. CDDBURL Specifies a server to use for CDDB lookups. CDDBPROTO Specifies the protocol version used for the CDDB retrieval of results. Version 6 retrieves CDDB entries in UTF-8 format. HELLOINFO Specifies the Hello information to send to the CDDB server. The CDDB protocol requires you to send a valid username and hostname each time you connect. The for‐ mat of this is username@hostname. CDDBLOCALDIR Specifies a directory where we store a local CDDB repository. The entries must be standard CDDB entries, with the filename being the DISCID value. Other CD playing and ripping programs (like Grip) store the entries under ~/.cddb and we can make use of those entries. CDDBLOCALRECURSIVE Specifies if the CDDBLOCALDIR has to be searched recursively trying to find a match for the CDDB entry. If a match is found and selected, and CDDBCOPYLOCAL is selected, it will be copied to the root of the CDDBLOCALDIR if CDDBLOCALPOLICY is "modified" or "new". The default "y" is needed for the local CDDB search to work. CDDBLOCALPOLICY Defines when a CDDB entry should be stored in the defined CDDBLOCALDIR. The possi‐ ble policies are: "net" for a CDDB entry which has been received from the net (overwriting any possible local CDDB entry); "new" for a CDDB entry which was received from the net, but will request confirmation to overwrite a local CDDB entry found in the root of the CDDBLOCALDIR directory; "modified" for a CDDB entry found in the local repository but which has been modified by the user; and "always" which forces the CDDB entry to be stored back in the root of the CDDBLOCALDIR no matter where it was found, and no matter it was not edited. This last option will always overwrite the one found in the root of the local repository (if any). STILL NOT WORKING!! CDDBCOPYLOCAL Store local copies of the CDDB entries under the $CDDBLOCALDIR directory. CDDBUSELOCAL Actually use the stored copies of the CDDB entries. Can be overridden using the "-L" flag (if is CDDBUSELOCAL in "n"). If an entry is found, we always give the choice of retrieving a CDDB entry from the internet. SHOWCDDBFIELDS Coma-separated list of fields we want to parse during the CDDB parsing. Defaults to "year,genre". OGGENCODERSYNTAX Specifies the style of encoder to use for the Ogg/Vorbis encoder. Valid options are ´oggenc´ (default for Ogg/Vorbis) and ´vorbize´. This affects the default location of the binary, the variable to pick encoder command-line options from, and where the options are given. MP3ENCODERSYNTAX Specifies the style of encoder to use for the MP3 encoder. Valid options are ´lame´ (default for MP3), ´gogo´, ´bladeenc´, ´l3enc´ and ´mp3enc´. Affects the same way as explained above for Ogg/Vorbis. FLACENCODERSYNTAX Specifies the style of encoder to use for the FLAC encoder. At this point only ´flac´ is available for FLAC encoding. MP2ENCODERSYNTAX Specifies the style of encoder to use for the MPEG-1 Audio Layer II (MP2) encoder. At this point both ´twolame´ and ´ffmpeg´ are available for MP2 encoding. SPEEXENCODERSYNTAX Specifies the style of encoder to use for Speex encoder. At this point only ´speex‐ enc´ is available for Ogg/Speex encoding. MPCENCODERSYNTAX Specifies the style of encoder to use for MPP/MP+ (Musepack) encoder. At this point we only have ´mpcenc´ available, from AACENCODERSYNTAX Specifies the style of encoder to use for M4A (AAC) encoder. We support ´fdkaac´ as ´default´ as well as FFmpeg or avconv, neroAacEnc, qaac and fhgaacenc. If qaac, refalac or FFmpeg / avconv are used it is also possible to generate Apple Lossless Audio Codec (alac) files. Note that qaac, refalac and fhgaacenc are Windows appli‐ cations which require Wine to be installed. TTAENCODERSYNTAX Specifies the style of encoder to use for True Audio (tts) encoding. We support ´tta´ as default but the older ´ttaenc´ can be used as well. WVENCODERSYNTAX Specifies the style of encoder to use for WavPack. We support ´wavpack´ as ´default´ but ´ffmpeg' is the other option (Note that this is for FFmpeg only as avconv does not have a native WavPack encoder). APENCODERSYNTAX Specifies the style of encoder to use for Monkey's Audio (ape). We support ´mac´, Monkey's Audio Console, as ´default´. OPUSENCODERSYNTAX Specifies the style of encoder to use for the Opus encoder. At this point only ´opusenc´ is available for Opus encoding. MKAENCODERSYNTAX Specifies the style of encoder to use for the Matroska or mka container. At this point only ´ffmpeg´ is available to utilise the mka container. Safe audio codecs for mka include Vorbis, MP2, MP3, LC-AAC, HE-AAC, WMAv1, WMAv2, AC3, eAC3 and Opus. See the FAQ document for more information. NORMALIZERSYNTAX Specifies the style of normalizer to use. Valid options are ´default´ and ´normal‐ ize' (and both run ´normalize-audio´), since we only support it, ATM. CDROMREADERSYNTAX Specifies the style of cdrom reader to use. Valid options are ´cdparanoia´, ´libc‐ dio' ´debug´ and ´flac´. It is used for querying the CDROM and obtain a list of valid tracks and DATA tracks. The special ´flac´ case is u sed to "rip" CD tracks from a single-track flac file. CUEREADERSYNTAX Specifies the syntax of the program we use to read the CD CUE sheet. Right now we only support ´mkcue´, but in the future other readers might be used. KEEPWAVS It defaults to no, so if you want to keep those wavs ripped from your CD, set it to "y". You can use the "-k" switch in the command line. The default behaviour with KEEPWAVS set is to keep the temporary directory and the wav files even you have requested the "clean" action. PADTRACKS If set to "y", it adds 0's to the file numbers to complete a two-number holder. Useful when encoding tracks 1-9. INTERACTIVE Set to "n" if you want to perform automatic rips, without user intervention. NICE VALUES Define the values for priorities (nice values) for the different CPU-hungry pro‐ cesses: encoding (ENCNICE), CDROM read (READNICE) and distributed encoder with distmp3 (DISTMP3NICE). PATHNAMES The following configuration file options specify the pathnames of their respective utilities: LAME, GOGO, BLADEENC, L3ENC, XINGMP3ENC, MP3ENC, VORBIZE, OGGENC, FLAC, SPEEXENC, MPCENC, WAVEPACK, APENC, OPUSENC, ID3, EYED3, METAFLAC, CDPARANOIA, CD_PARANOIA, CDDA2WAV, PIRD, CDDAFS, CDDISCID, CDDBTOOL, EJECT, MD5SUM, DISTMP3, VORBISCOMMENT, NORMALIZE, CDSPEED, MP3GAIN, VORBISGAIN, MPCGAIN, MKCUE, MKTOC, CUE2DISCID (see option "-X"), DIFF, HTTPGET, GLYRC, IDENTIFY, DISPLAYCMD, CONVERT, QAAC, WINE, FHGAACENC, ATOMICPARSLEY, FFMPEG, TWOLAME, MID3V2, TTA and TTAENC. COMMAND-LINE OPTIONS If you wish to specify command-line options to any of the programs abcde uses, set the following configuration file options: LAMEOPTS, GOGOOPTS, BLADEENCOPTS, L3ENCOPTS, XINGMP3ENCOPTS, MP3ENCOPTS, VORBIZEOPTS, WAVEPACKENCOPTS, APENCOPTS, OGGENCOPTS, FLACOPTS, SPEEXENCOPTS, MPCENCOPTS, FAACENCOPTS, NEROAACENCOPTS, FDKAA‐ CENCOPTS, OPUSENCOPTS, ID3OPTS, EYED3OPTS, MP3GAINOPTS, CDPARANOIAOPTS, CDDA2WAVOPTS, PIRDOPTS, CDDAFSOPTS, CDDBTOOLOPTS, EJECTOPTS, DISTMP3OPTS, NORMAL‐ IZEOPTS, CDSPEEDOPTS, MKCUEOPTS, VORBISCOMMMENTOPTS, METAFLACOPTS, DIFFOPTS, FLAC‐ GAINOPTS, VORBISGAINOPTS, HTTPGETOPTS, GLYRCOPTS, IDENTIFYOPTS, CONVERTOPTS, DIS‐ PLAYCMDOPTS, QAACENCOPTS, FHGAACENCOPTS, ATOMICPARSLEYOPTS, FFMPEGENCOPTS, TWOLA‐ MENCOPTS and TTAENCOPTS. CDSPEEDVALUE Set the value of the CDROM speed. The default is to read the disc as fast as the reading program and the system permits. The steps are defined as 150kB/s (1x). ACTIONS The default actions to be performed when reading a disc. CDROM If set, it points to the CD-Rom device which has to be used for audio extraction. Abcde tries to guess the right device, but it may fail. The special ´flac´ option is defined to extract tracks from a single-track flac file. CDPARANOIACDROMBUS Defined as "d" when using cdparanoia with an IDE bus and as "g" when using cdpara‐ noia with the ide-scsi emulation layer. OUTPUTDIR Specifies the directory to place completed tracks/playlists in. WAVOUTPUTDIR Specifies the temporary directory to store .wav files in. Abcde may use up to 700MB of temporary space for each session (although it is rare to use over 100MB for a machine that can encode music as fast as it can read it). OUTPUTTYPE Specifies the encoding format to output, as well as the default extension and encoder. Defaults to "vorbis". Valid settings are "vorbis" (or "ogg") (Ogg/Vorbis), "mp3" (MPEG-1 Audio Layer III), "flac" (Free Lossless Audio Codec), "mp2" (MPEG-1 Audio Layer III), "spx" (Ogg/Speex), "mpc" (MPP/MP+ (Musepack), "m4a" (AAC or ALAC),"wv" (WavPack"), "wav" (Microsoft Waveform), "opus" (Opus Interactive Audio Codec), "tta" (True Audio) or "mka" (Matroska). Values like "vorbis,mp3" encode the tracks in both Ogg/Vorbis and MP3 formats. For example: OUTPUTTYPE=vorbis,flac For each value in OUTPUTTYPE, abcde expands a different process for encoding, tag‐ ging and moving, so you can use the format placeholder, OUTPUT, to create different subdirectories to hold the different types. The variable OUTPUT will be 'vorbis', 'mp3', 'flac', 'spx', 'mpc', 'm4a', mp2, 'wv', 'ape', 'tta', 'wav' and/or 'mka' depending on the OUTPUTTYPE you define. For example OUTPUTFORMAT='${OUTPUT}/${ARTISTFILE}/${ALBUMFILE}/${TRACKNUM}._${TRACKFILE}' OUTPUTFORMAT Specifies the format for completed Ogg/Vorbis, MP3, FLAC, Ogg/Speex, MPP/MP+ (Musepack) or M4A filenames. Variables are included using standard shell syntax. Allowed variables are GENRE, ALBUMFILE, ARTISTFILE, TRACKFILE, TRACKNUM, and YEAR. Default is ´${ARTISTFILE}-${ALBUMFILE}/${TRACKNUM}-${TRACKFILE}´. Make sure to use single quotes around this variable. TRACKNUM is automatically zero-padded, when the number of encoded tracks is higher than 9. When lower, you can force with '-p' in the command line. VAOUTPUTFORMAT Just like OUTPUTFORMAT but for Various Artists discs. The default is 'Vari‐ ous-${ALBUMFILE}/${TRACKNUM}.${ARTISTFILE}-${TRACKFILE}' ONETRACKOUTPUTFORMAT Just like OUTPUTFORMAT but for single-track rips (see option "-1"). The default is '${ARTISTFILE}-${ALBUMFILE}/${ALBUMFILE}' VAONETRACKOUTPUTFORMAT Just like ONETRACKOUTPUTFORMAT but for Various Artists discs. The default is 'Vari‐ ous-${ALBUMFILE}/${ALBUMFILE}' MAXPROCS Defines how many encoders to run at once. This makes for huge speedups on SMP sys‐ tems. You should run one encoder per CPU at once for maximum efficiency, although more doesn't hurt very much. Set it "0" when using mp3dist to avoid getting encod‐ ing processes in the local host. LOWDISK If set to y, conserves disk space by encoding tracks immediately after reading them. This is substantially slower than normal operation but requires several hun‐ dred MB less space to complete the encoding of an entire CD. Use only if your sys‐ tem is low on space and cannot encode as quickly as it can read. Note that this option may also help when reading a CD with errors. This is because on a scratchy disk reading is quite timing sensitive and this option reduces the background load on the system which allows the ripping program more precise con‐ trol. BATCHNORM If set to y, enables batch mode normalization, which preserves relative volume dif‐ ferences between tracks of an album. Also enables nogap encoding when using the ´lame´ encoder. NOGAP Activate the lame's --nogap option, that allows files found in CDs with no silence between songs (such as live concerts) to be encoded without noticeable gaps. WARN‐ ING: lame's --nogap disables the Xing mp3 tag. This tag is required for mp3 play‐ ers to correctly display track lengths when playing variable-bit-rate mp3 files. PLAYLISTFORMAT Specifies the format for completed playlist filenames. Works like the OUTPUTFORMAT configuration variable. Default is ´${ARTISTFILE}_-_${ALBUMFILE}.m3u´. Make sure to use single quotes around this variable. PLAYLISTDATAPREFIX Specifies a prefix for filenames within a playlist. Useful for http playlists, etc. DOSPLAYLIST If set, the resulting playlist will have CR-LF line endings, needed by some hard‐ ware-based players. COMMENT Specifies a comment to embed in the ID3 or Ogg comment field of each finished track. Can be up to 28 characters long. Supports the same syntax as OUTPUTFORMAT. Does not currently support ID3v2. REMOTEHOSTS Specifies a comma-delimited list of systems to use for remote encoding using distmp3. Equivalent to -r. mungefilename mungefilename() is an abcde shell function that can be overridden via abcde.conf. It takes CDDB data as $1 and outputs the resulting filename on stdout. It defaults to deleting any preceding dots to filename, replacing spaces with an underscore and eating characters which variously Windows and Linux do not permit. If you modify this function, it is probably a good idea to keep the forward slash munging (UNIX cannot store a file with a '/' char in it) as well as the control character munging (NULs can't be in a filename either, and newlines and such in filenames are typically not desirable). New to abcde 2.7.3 are the user definable functions mungetrackname, mungeartistname and mungealbumname which default to mungefilename. These permit finer-grained con‐ trol of track name, artist name and album name for the ultra-fastidious. mungegenre mungegenre () is a shell function used to modify the $GENRE variable. As a default action, it takes $GENRE as $1 and outputs the resulting value to stdout converting all UPPERCASE characters to lowercase. pre_read pre_read () is a shell function which is executed before the CDROM is read for the first time, during abcde execution. It can be used to close the CDROM tray, to set its speed (via "setcd" or via "eject", if available) and other preparation actions. The default function is empty. post_read post_read () is a shell function which is executed after the CDROM is read (and, if applies, before the CDROM is ejected). It can be used to read a TOC from the CDROM, or to try to read the DATA areas from the CD (if any exist). The default function is empty. EJECTCD If set to "y", abcde will call eject(1) to eject the cdrom from the drive after all tracks have been read. It has no effect when CDROM is set to a flac file. EXTRAVERBOSE If set to "1", some operations which are usually now shown to the end user are vis‐ ible, such as CDDB queries. Useful for initial debug and if your network/CDDB server is slow. Set to "2" or more for even more verbose output.


Possible ways one can call abcde: abcde Will work in most systems abcde -d /dev/cdrom2 If the CDROM you are reading from is not the standard /dev/cdrom (in GNU/Linux sys‐ tems) abcde -o vorbis,flac Will create both Ogg/Vorbis and Ogg/FLAC files. abcde -o vorbis:"-b 192" Will pass "-b 192" to the Ogg/Vorbis encoder, without having to modify the config file abcde -W 1 For double+ CD settings: will create the 1st CD starting with the track number 101, and will add a comment "CD 1" to the tracks, the second starting with 201 and so on. abcde -d singletrack.flac -o vorbis:"-q 6" Will extract the files contained in singletrack FLAC file using the embedded cuesheet and then encode the output files to Ogg/Vorbis with a quality setting of 6.


abcde requires the following backend tools to work: * An Ogg/Vorbis, MP3, FLAC, Ogg/Speex, MPP/MP+(Musepack), M4A encoder or Opus encoder (oggenc, vorbize, lame, gogo, bladeenc, l3enc, mp3enc, flac, speexenc, mpcenc, fdkaac, neroAacEnc, faac, wavpack, opusenc). * An audio CD reading utility (cdparanoia, icedax, cdda2wav, libcdio (cd-paranoia), pird, dagrab). To read CD-TEXT information, icedax or cdda2wav will be needed. * cd-discid, a CDDB DiscID reading program. * An HTTP retrieval program: wget, fetch (FreeBSD) or curl (Mac OS X, among others). Alternatively, abcde-musicbrainz-tool (which depends on Perl and some Musicbrainz libraries) can be used to retrieve CDDB information about the CD. * (for MP3s) id3 or eyeD3, id3 v1 and v2 tagging programs. * For Monkey's Audio (ape) tagging Robert Muth's 'apetag' is required. * To retrieve album art a glyrc package is required and optionally the ImageMagick package should be installed. * (optional) distmp3, a client/server for distributed mp3 encoding. * (optional) normalize-audio, a WAV file volume normalizer. * (optional) a replaygain file volume modifier (vorbisgain, metaflac, mp3gain, mpc‐ gain, wvgain), * (optional) mkcue, a CD cuesheet extractor.


cdparanoia(1), cd-paranoia(1) icedax(1), cdda2wav(1), twolame(1), mid3v2(1), pird(1), dagrab(1), normalize-audio(1), oggenc(1), vorbize(1), flac(1), speexenc(1), mpcenc(1), faac(1), fdkaac(1), identify(1), display(1), convert(1), wavpack(1), wvgain(1), id3(1), eyeD3(1), wget(1), fetch(1), cd-discid(1), distmp3(1), distmp3host(1), curl(1), mkcue(1), vorbisgain(1), mp3gain(1)


Robert Woodcock <>, Jesus Climent <>, Colin Tuck‐ ley <>, Steve McIntyre <>, Andrew Strong <> and contributions from many others.
This manual Reference Other manuals
abcde(1) referred by
refer to cd-discid(1) | cdparanoia(1) | curl(1) | eject(1) | eyeD3(1) | faac(1) | fdkaac(1) | flac(1) | gm(1) | icedax(1) | id3(1) | mid3v2(1) | mkcue(1) | normalize-audio(1) | oggenc(1) | speexenc(1) | twolame(1) | vorbisgain(1) | wavpack(1) | wget(1)
Download raw manual
Index General Commands Manual (+12866) № 1 (+39907)
Go top