PMLOGGER_CHECK(1) - Linux manual page online | User commands
Administration of Performance Co-Pilot archive log files.
PMLOGGER_CHECK(1) General Commands Manual PMLOGGER_CHECK(1)
Performance Co-Pilot PCP PMLOGGER_CHECK(1)
NAMEpmlogger_check, pmlogger_daily, pmlogger_merge - administration of Performance Co-Pilot archive log files
SYNOPSIS$PCP_BINADM_DIR/pmlogger_check [-CNsTV] [-c control] [-l logfile] $PCP_BINADM_DIR/pmlogger_daily [-KMNorV] [-c control] [-k discard] [-l logfile] [-m addresses] [-s size] [-t want] [-x compress] [-X program] [-Y regex] $PCP_BINADM_DIR/pmlogger_merge [-fNV] [input-basename ... output-name]
DESCRIPTIONThis series of shell scripts and associated control files may be used to create a custom‐ ized regime of administration and management for Performance Co-Pilot (see PCPintro(1)) archive log files. pmlogger_daily is intended to be run once per day, preferably in the early morning, as soon after midnight as practicable. Its task is to aggregate and rotate one or more sets of PCP archives. After some period, old PCP archives are discarded. This period is 14 days by default, but may be changed using the -k option. Some special values are recog‐ nized for the period (discard), namely 0 to keep no archives beyond the current one, and forever or never to prevent any archives being discarded. Note that the semantics of dis‐ card are that it is measured from the time of last modification of each archive, and not from the current day. This has subtle implications for compression (see below) - the com‐ pression process results in the creation of new archive files which have new modification times. In this case, the discard period (re)starts from the time of compression. Archive data files can optionally be compressed after some period to conserve disk space. This is particularly useful for large numbers of pmlogger processes under the control of pmlogger_check. If transparent_decompress is enabled when libpcp was built (can be checked with pmconfig -L), then the default behaviour is compression ``as soon as possi‐ ble'' otherwise the default behaviour is to not compress files (which matches the histori‐ cal default behaviour in earlier PCP releases). The -x option controls compression and compress specifies the number of days after which to compress archive data files. If compress is 0 then compression will be applied as soon as possible. If compress is never or forever then no compression will be done. The envi‐ ronment variable PCP_COMPRESSAFTER may be used as an alternative mechanism to define com‐ press. If both PCP_COMPRESSAFTER and -x specify different values for compress then the environment variable value is used and a warning is issued. The -X option specifies the program to use for compression - by default this is xz(1). The environment variable PCP_COMPRESS may be used as an alternative mechanism to define program. If both PCP_COMPRESS and -X specify different compression programs then the environment variable value is used and a warning is issued. Use of the -Y option allows a regular expression to be specified causing files in the set of files matched for compression to be omitted - this allows only the data file to be com‐ pressed, and also prevents the program from attempting to compress it more than once. The default regex is ".(meta|index|Z|gz|bz2|zip|xz|lzma|lzo|lz4)$" - such files are filtered using the -v option to egrep(1). The environment variable PCP_COMPRESSREGEX may be used as an alternative mechanism to define regex. If both PCP_COMPRESSREGEX and -Y specify different values for regex then the environment variable value is used and a warning is issued. To accommodate the evolution of PMDAs and changes in production logging environments, pmlogger_daily is integrated with pmlogrewrite(1) to allow optional and automatic rewrit‐ ing of archives before merging. If there are global rewriting rules to be applied across all archives mentioned in the control file(s), then create the directory $PCP_SYSCONF_DIR/pmlogrewrite and place any pmlogrewrite(1) rewriting rules in this direc‐ tory. For rewriting rules that are specific to only one family of archives, use the directory name from the control file(s) - i.e. the fourth field - and create a file, or a directory, or a symbolic link named pmlogrewrite within this directory and place the required rewriting rule(s) in the pmlogrewrite file or in files within the pmlogrewrite subdirectory. pmlogger_daily will choose rewriting rules from the archive directory if they exist, else rewriting rules from $PCP_SYSCONF_DIR/pmlogrewrite if that directory exists, else no rewriting is attempted. The -r command line option acts as an over-ride and prevents all archive rewriting with pmlogrewrite(1) independent of the presence of any rewriting rule files or directories. By default all possible archives will be merged. The -o option reinstates the old behav‐ iour in which only yesterday's archives will be considered as merge candidates. In the special case where only a single input archive needs to be merged, pmlogmv(1) is used to rename the archive, rather than copy the input archive using pmlogger_merge. The -M option may be used to disable archive merging (or renaming) and rewriting (-M implies -r). This is most useful in cases where the archives are being incrementally copied to a remote repository, e.g. using rsync(1). Merging, renaming and rewriting all risk an increase in the synchronization load, especially immediately after pmlogger_daily has run, so -M may be useful in these cases. To assist with debugging or diagnosing intermittent failures the -t option may be used. This will turn on very verbose tracing (-VV) and capture the trace output in a file named $PCP_LOG_DIR/pmlogger/daily.datestamp.trace, where datestamp is the time pmlogger_daily was run in the format YYYYMMDD.HH.MM. In addition, the want argument will ensure that trace files created with -t will be kept for want days and then discarded. In addition, if the PCP ``notices'' file ($PCP_LOG_DIR/NOTICES) is larger than 20480 bytes, pmlogger_daily will rename the file with a ``.old'' suffix, and start a new ``notices'' file. The rotate threshold may be changed from 20480 to size bytes using the -s option. Use of the -m option causes pmlogger_daily to construct a summary of the ``notices'' file entries which were generated in the last 24 hours, and e-mail that summary to the set of space-separated addresses. This daily summary is stored in the file $PCP_LOG_DIR/NOTICES.daily, which will be empty when no new ``notices'' entries were made in the previous 24 hour period. If the -K option is specified for pmlogger_daily then only the compression tasks are attempted, so no pmlogger(1) rotation, no culling, no rewriting, etc. When -K is used and a compress value of 0 is in effect (from -x on the command line or PCP_COMPRESSAFTER in the environment or via the control file) this is intended for environments where compres‐ sion of archives is desired before the scheduled daily processing happens. To achieve this, once pmlogger_check has completed regular processing, it calls pmlogger_daily with just the -K option. Provided PCP_COMPRESSAFTER is set to 0 along with any other required compression options to match the scheduled invocation of pmlogger_daily, then this will compress all volumes except the ones being currently written by pmlogger(1). The script $PCP_BINADM_DIR/pmlogger_daily could be copied and modified to implement a site-specific procedure for end-of-week and/or end-of-month management for a set of PCP archives. pmlogger_check may be run at any time, and is intended to check that the desired set of pmlogger(1) processes are running, and if not to re-launch any failed loggers. Use of the -s option provides the reverse functionality, allowing the set of pmlogger processes to be cleanly shutdown. Use of the -C option queries the system service runlevel information for pmlogger, and uses that to determine whether to start processes. The -T option provides a terser form of output for pmlogger_check that is most suitable for a pmlogger ``farm'' where many instances of pmlogger are expected to be running. pmlogger_merge is a wrapper script for pmlogextract(1) that merges all of the archive logs matching the input-basename arguments, and creates a new archive using output-name as the base name for the physical files that constitute an archive log. The input-basename argu‐ ments may contain meta characters in the style of sh(1). If specified, the -f option causes all of the input files to be removed once the output archive has been created. pmlogger_merge is used by pmlogger_daily. Both pmlogger_daily and pmlogger_check are controlled by PCP logger control file(s) that specifies the pmlogger instances to be managed. The default control file is $PCP_PMLOG‐ GERCONTROL_PATH, but an alternate may be specified using the -c option. If the directory $PCP_PMLOGGERCONTROL_PATH.d (or control.d from the -c option) exists, then the contents of any additional control files therein will be appended to the main control file (which must exist). Warning: The $PCP_PMLOGGERCONTROL_PATH and $PCP_PMLOGGERCONTROL_PATH.d files must not be writable by any user other than root. The control file(s) should be customized according to the following rules that define for the current version (1.1) of the control file format. 1. Lines beginning with a ``#'' are comments. 2. Lines beginning with a ``$'' are assumed to be assignments to environment variables in the style of sh(1), and all text following the ``$'' will be eval'ed by the script reading the control file, and the corresponding variable exported into the environ‐ ment. This is particularly useful to set and export variables into the environment of the administrative scripts, e.g. $ PMCD_CONNECT_TIMEOUT=20 3. There must be a version line in the initial control file of the form: $ version=1.1 4. There should be one line in the control file(s) for each pmlogger instance of the form: host y|n y|n directory args 5. Fields within a line of the control file(s) are usually separated by one or more spa‐ ces or tabs (although refer to the description of the directory field for some impor‐ tant exceptions). 6. The first field is the name of the host that is the source of the performance metrics for this pmlogger instance. 7. The second field indicates if this is a primary pmlogger instance (y) or not (n). Since the primary logger must run on the local host, and there may be at most one pri‐ mary logger for a particular host, this field can be y for at most one pmlogger instance, in which case the host name must be the name of the local host. 8. The third field indicates if this pmlogger instance needs to be started under the con‐ trol of pmsocks(1) to connect to a pmcd through a firewall (y or n). 9. The fourth field is a directory name. All files associated with this pmlogger instance will be created in this directory, and this will be the current directory for the execution of any programs required in the maintenance of those archives. A useful convention is that primary logger archives for the local host with hostname myhost are maintained in the directory $PCP_LOG_DIR/pmlogger/myhost (this is where the default pmlogger start-up script in $PCP_RC_DIR/pcp will create the archives), while archives for the remote host mumble are maintained in $PCP_LOG_DIR/pmlogger/mumble. 10. The directory field may contain embedded shell syntax that will be evaluated by sh(1) to produce the real directory name to be used. The allowed constructs are: · Any text (including white space) enclosed with $( and ). · Any text (including white space) enclosed with ` and ` (back quotes). · Any text (including white space) enclosed with " and " (double quotes). · Any word containing a $ (assumed to introduce an environment variable name). 11. All other fields are interpreted as arguments to be passed to pmlogger(1) and/or pmnewlog(1). Most typically this would be the -c option. The following sample control lines specify a primary logger on the local host (bozo), and non-primary loggers to collect and log performance metrics from the hosts wobbly and boing. $version=1.1 bozo y n $PCP_LOG_DIR/pmlogger/bozo -c config.default wobbly n n "/store/wobbly/$(date +%Y)" -c ./wobbly.config boing n n $PCP_LOG_DIR/pmlogger/boing -c ./pmlogger.config Typical crontab(5) entries for periodic execution of pmlogger_daily and pmlogger_check are given in $PCP_SYSCONF_DIR/pmlogger/crontab (unless installed by default in /etc/cron.d already) and shown below. # daily processing of archive logs 14 0 * * * $PCP_BINADM_DIR/pmlogger_daily # every 30 minutes, check pmlogger instances are running 25,55 * * * * $PCP_BINADM_DIR/pmlogger_check In order to ensure that mail is not unintentionally sent when these scripts are run from cron(8) diagnostics are always sent to a log file. By default, this file is $PCP_LOG_DIR/pmlogger/pmlogger_daily.log or $PCP_LOG_DIR/pmlogger/pmlogger_check.log but this can be changed using the -l option. If this log file already exists when the script starts, it will be renamed with a .prev suffix (overwriting any log file saved earlier) before diagnostics are generated to the log file. The -l and -t options cannot be used together. The output from the cron execution of the scripts may be extended using the -V option to the scripts which will enable verbose tracing of their activity. By default the scripts generate no output unless some error or warning condition is encountered.
FILES$PCP_PMLOGGERCONTROL_PATH the PCP logger control file Warning: this file must not be writable by any user other than root. $PCP_PMLOGGERCONTROL_PATH.d optional directory containing additional PCP logger control files, typically one per host Warning: the files herein must not be writable by any user other than root. $PCP_SYSCONF_DIR/pmlogger/crontab sample crontab for automated script execution by $PCP_USER (or root). Exists only if the platform does not support the /etc/cron.d mechanism. $PCP_VAR_DIR/config/pmlogger/config.default default pmlogger configuration file location for the local primary logger, typi‐ cally generated automatically by pmlogconf(1). $PCP_LOG_DIR/pmlogger/hostname default location for archives of performance information collected from the host hostname $PCP_LOG_DIR/pmlogger/hostname/lock transient lock file to guarantee mutual exclusion during pmlogger administration for the host hostname - if present, can be safely removed if neither pmlog‐ ger_daily nor pmlogger_check are running $PCP_LOG_DIR/pmlogger/hostname/Latest PCP archive folio created by mkaf(1) for the most recently launched archive con‐ taining performance metrics from the host hostname $PCP_LOG_DIR/NOTICES PCP ``notices'' file used by pmie(1) and friends
PCP ENVIRONMENTEnvironment variables with the prefix PCP_ are used to parameterize the file and directory names used by PCP. On each installation, the file /etc/pcp.conf contains the local values for these variables. The $PCP_CONF variable may be used to specify an alternative config‐ uration file, as described in pcp.conf(5).
SEE ALSOegrep(1), PCPIntro(1), pmconfig(1), pmlc(1), pmlogconf(1), pmlogextract(1), pmlogger(1), pmlogger_daily_report(1), pmlogmv(1), pmlogrewrite(1), pmnewlog(1), pmsocks(1), xz(1) and cron(8).
|This manual||Reference||Other manuals|
|pmlogger_check(1)||referred by||LOGARCHIVE(5) | pcp-atop(1) | pcp-atopsar(1) | PCPIntro(1) | pmdumplog(1) | pmlogextract(1) | pmlogger(1) | pmlogger_daily_report(1) | pmloglabel(1) | pmmgr(1) | pmnewlog(1) | pmsnap(1)|
|refer to||cron(8) | crontab(5) | dash(1) | grep(1) | mkaf(1) | pcp.conf(5) | PCPIntro(1) | pmconfig(1) | pmie(1) | pmlc(1) | pmlogconf(1) | pmlogextract(1) | pmlogger(1) | pmlogger_daily_report(1) | pmlogmv(1) | pmlogrewrite(1) | pmnewlog(1) | pmsocks(1) | rsync(1) | xz(1)|