PCPINTRO(1) - man page online | user commands
Introduction to the Performance Co-Pilot (PCP).
PCPINTRO(1) General Commands Manual PCPINTRO(1)
NAMEPCPIntro - introduction to the Performance Co-Pilot (PCP)
INTRODUCTIONThe Performance Co-Pilot (PCP) is a toolkit designed for monitoring and managing system- level performance. These services are distributed and scalable to accommodate the most complex system configurations and performance problems. PCP supports many different platforms, including (but not limited to) Linux, MacOSX, Solaris and Windows. From a high-level PCP can be considered to contain two classes of software utility: PCP Collectors These are the parts of PCP that collect and extract performance data from various sources, e.g. the operating system kernel. PCP Monitors These are the parts of PCP that display data collected from hosts (or archives) that have the PCP Collector installed. Many monitor tools are available as part of the core PCP release, while other (typically graphical) monitoring tools are available separately in the PCP GUI package. This manual entry describes the high-level features and options common to most PCP utili‐ ties available on all platforms.
OVERVIEWThe PCP architecture is distributed in the sense that any PCP tool may be executing remotely. On the host (or hosts) being monitored, each domain of performance metrics, whether the kernel, a service layer, a database management system, a web server, an appli‐ cation, etc. requires a Performance Metrics Domain Agent (PMDA) which is responsible for collecting performance measurements from that domain. All PMDAs are controlled by the Performance Metrics Collector Daemon (pmcd(1)) on the same host. Client applications (the monitoring tools) connect to pmcd(1), which acts as a router for requests, by forwarding requests to the appropriate PMDA and returning the responses to the clients. Clients may also access performance data from a PCP archive (created using pmlogger(1)) for retrospective analysis. Security philosophy PCP redistributes a wealth of performance information within a host and across its net‐ works. The following security philosophy underlies the setting of several defaults that control how much information is sent and received. By default, the information exposed by PMCD about a host is approximately of the same level of confidentiality as available to a completely unprivileged user on that host. So, performance data that is available to be read completely freely on a machine may be made available by PMCD to the network. However, the host running PMCD and its network is not assumed to run only friendly appli‐ cations. Therefore, write type operations, including from the local host, are not permit‐ ted by default. These defaults may be overridden (expanded or reduced) in several ways, including by spec‐ ifying network ACLs in pmcd.conf, activating non-default PMDAs, or by using PMCD connec‐ tions that pass user credentials. For example, some PMDAs automatically provide greater information for particular credentialed users or groups. Applications The following performance monitoring applications are primarily console based, typically run directly from the command line, and are just a small subset of the tools available as part of the base PCP package. Each tool or command is documented completely in its own reference page. pmstat Outputs an ASCII high-level summary of system performance. pmie An inference engine that can evaluate predicate-action rules to perform alarms and automate system management tasks. pminfo Interrogate specific performance metrics and the metadata that describes them. pmlogger Generates PCP archives of performance metrics suitable for replay by most PCP tools. pmval Simple periodic reporting for some or all instances of a performance metric, with optional VCR time control. If the PCP GUI package is installed then the following additional tools are available. pmchart Displays trends over time of arbitrarily selected performance metrics from one or more hosts. pmtime Time control utility for coordinating the time between multiple tools (including pmchart and pmval). pmdumptext Produce ASCII reports for arbitrary combinations of performance metrics.
COMMON COMMAND LINE ARGUMENTSThere is a set of common command line arguments that are used consistently by most PCP tools. -a archive Performance metric information is retrospectively retrieved from the Performance Co-Pilot (PCP) archive, previously generated by pmlogger(1).See pcp-archive(5)for‐ formatdocumentation. The -a and -h options are mutually exclusive. archive is either the base name common to all of the physical files created by an instance of pmlogger(1), or any one of the physical files, e.g. myarchive (base name) or myarchive.meta (the metadata file) or myarchive.index (the temporal index) or myarchive.0 (the first data volume of archive) or myarchive.0.bz2 or myarchive.0.bz (the first data volume compressed with bzip2(1)) or myarchive.0.gz or myarchive.0.Z or myarchive.0.z (the first data volume compressed with gzip(1)), myarchive.1 or myarchive.3.bz2 or myarchive.42.gz etc. -a archive[,archive,...] An alternate form of -a for applications that are able to handle multiple archives. -h hostname Unless directed to another host by the -h option, or to an archive by the -a option, the source of performance metrics will be the Performance Metrics Collector Daemon (PMCD) on the local host. Refer to the PMCD HOST SPECIFICATION section later for further details on the many options available when forming the hostname specification, as well as a detailed description of the default local host connec‐ tion. The -a and -h options are mutually exclusive. -s samples The argument samples defines the number of samples to be retrieved and reported. If samples is 0 or -s is not specified, the application will sample and report con‐ tinuously (in real time mode) or until the end of the PCP archive (in archive mode). -z Change the reporting timezone to the local timezone at the host that is the source of the performance metrics, as identified via either the -h or -a options. -Z timezone By default, applications report the time of day according to the local timezone on the system where the application is executed. The -Z option changes the timezone to timezone in the format of the environment variable TZ as described in envi‐ ron(7).
INTERVAL SPECIFICATION AND ALIGNMENTMost PCP tools operate with periodic sampling or reporting, and the -t and -A options may be used to control the duration of the sample interval and the alignment of the sample times. -t interval Set the update or reporting interval. The interval argument is specified as a sequence of one or more elements of the form number[units] where number is an integer or floating point constant (parsed using strtod(3)) and the optional units is one of: seconds, second, secs, sec, s, minutes, minute, mins, min, m, hours, hour, h, days, day and d. If the unit is empty, second is assumed. In addition, the upper case (or mixed case) version of any of the above is also acceptable. Spaces anywhere in the interval are ignored, so 4 days 6 hours 30 minutes, 4day6hour30min, 4d6h30m and 4d6.5h are all equivalent. Multiple specifications are additive, e.g. ``1hour 15mins 30secs'' is interpreted as 3600+900+30 seconds. -A align By default samples are not necessarily aligned on any natural unit of time. The -A option may be used to force the initial sample to be aligned on the boundary of a natural time unit. For example -A 1sec, -A 30min and -A 1hour specify alignment on whole seconds, half and whole hours respectively. The align argument follows the syntax for an interval argument described above for the -t option. Note that alignment occurs by advancing the time as required, and that -A acts as a modifier to advance both the start of the time window (see the next section) and the origin time (if the -O option is specified).
TIME WINDOW SPECIFICATIONMany PCP tools are designed to operate in some time window of interest, e.g. to define a termination time for real-time monitoring or to define a start and end time within a PCP archive log. In the absence of the -O and -A options to specify an initial sample time origin and time alignment (see above), the PCP application will retrieve the first sample at the start of the time window. The following options may be used to specify a time window of interest. -S starttime By default the time window commences immediately in real-time mode, or coincides with time at the start of the PCP archive log in archive mode. The -S option may be used to specify a later time for the start of the time window. The starttime parameter may be given in one of three forms (interval is the same as for the -t option as described above, datetime is described below): interval To specify an offset from the current time (in real-time mode) or the begin‐ ning of a PCP archive (in archive mode) simply specify the interval of time as the argument. For example -S 30min will set the start of the time window to be exactly 30 minutes from now in real-time mode, or exactly 30 minutes from the start of a PCP archive. -interval To specify an offset from the end of a PCP archive log, prefix the interval argument with a minus sign. In this case, the start of the time window pre‐ cedes the time at the end of archive by the given interval. For example -S -1hour will set the start of the time window to be exactly one hour before the time of the last sample in a PCP archive log. @datetime To specify the calendar date and time (local time in the reporting timezone) for the start of the time window, use the datetime syntax preceded by an at sign. Refer to the datetime description below for detailed information. -T endtime By default the end of the time window is unbounded (in real-time mode) or aligned with the time at the end of a PCP archive log (in archive mode). The -T option may be used to specify an earlier time for the end of the time window. The endtime parameter may be given in one of three forms (interval is the same as for the -t option as described above, datetime is described below): interval To specify an offset from the start of the time window simply use the inter‐ val of time as the argument. For example -T 2h30m will set the end of the time window to be 2 hours and 30 minutes after the start of the time window. -interval To specify an offset back from the time at the end of a PCP archive log, prefix the interval argument with a minus sign. For example -T -90m will set the end of the time window to be 90 minutes before the time of the last sample in a PCP archive log. @datetime To specify the calendar date and time (local time in the reporting timezone) for the end of the time window, use the datetime syntax preceded by an at sign. Refer to the datetime description below for detailed information. -O origin By default samples are fetched from the start of the time window (see description of -S option) to the end of the time window (see description of -T option). The -O option allows the specification of an origin within the time window to be used as the initial sample time. This is useful for interactive use of a PCP tool with the pmtime(1) VCR replay facility. The origin argument accepted by -O conforms to the same syntax and semantics as the starttime argument for the -T option. For example -O -0 specifies that the initial position should be at the end of the time window; this is most useful when wishing to replay ``backwards'' within the time window. The datetime argument for the -O, -S and -T options consists of: date time zone day relative A date can be one of: YY-MM-DD, MM/DD/YY, DD Month YYYY, or Month DD YYYY. A time can be one of: HH:MM:SS, HH:MM. HH:MM can use either the 12 hour (via an am or pm suffix) or 24 hour convention. A day of the week can be a spelled out day of the week, optionally pre‐ ceded by an ordinal number such as second tuesday. A zone is a time zone value as speci‐ fied by the tzselect(1) command. A relative time can be a time unit that is: preceded by a cardinal number such as 1 year or 2 months, preceded by one of the time words this or last, or succeeded by the time word ago. A relative time can also be one of the time words: yesterday, today, tomorrow, now. Examples of datetime strings are: 1996-03-04 13:07:47 EST Mon, 1996-03-05 14:07:47 EST -1hour, Mon Mar 4 13:07:47 1996, Mar 4 1996, Mar 4, Mar, 13:07:50 or 13:08. For any missing low order fields, the default value of 0 is assumed for hours, minutes and seconds, 1 for day of the month and Jan for months. Hence, the following are equivalent: -S '@ Mar 1996' and -S '@ Mar 1 00:00:00 1996'. If any high order fields are missing, they are filled in by starting with the year, month and day from the current time (real-time mode) or the time at the beginning of the PCP ar‐ chive log (archive mode) and advancing the time until it matches the fields that are spec‐ ified. So, for example if the time window starts by default at ``Mon Mar 4 13:07:47 1996'', then -S @13:10 corresponds to 13:10:00 on Mon Mar 4, 1996, while -S @10:00 corre‐ sponds to 10:00:00 on Tue Mar 5, 1996 (note this is the following day). For greater precision than afforded by datetime(3), the seconds component may be a float‐ ing point number. PERFORMANCE METRICS - NAMES AND IDENTIFIERS The number of performance metric names supported by PCP on most platforms ranges from many hundreds to several thousand. The PCP libraries and applications use an internal identi‐ fication scheme that unambiguously associates a single integer with each known performance metric. This integer is known as the Performance Metric Identifier, or PMID. Although not a requirement, PMIDs tend to have global consistency across all systems, so a particu‐ lar performance metric usually has the same PMID. For all users and most applications, direct use of the PMIDs would be inappropriate (e.g. this would limit the range of accessible metrics, make the code hard to maintain, force the user interface to be particularly baroque, etc.). Hence a Performance Metrics Name Space (PMNS) is used to provide external names and a hierarchic classification for perfor‐ mance metrics. A PMNS is represented as a tree, with each node having a label, a pointer to either a PMID (for leaf nodes) or a set of descendent nodes in the PMNS (for non-leaf nodes). A node label must begin with an alphabetic character, followed by zero or more characters drawn from the alphabetics, the digits and character `_´ (underscore). For alphabetic characters in a node label, upper and lower case are distinguished. By convention, the name of a performance metric is constructed by concatenation of the node labels on a path through the PMNS from the root node to a leaf node, with a ``.'' as a separator. The root node in the PMNS is unlabeled, so all names begin with the label associated with one of the descendent nodes below the root node of the PMNS, e.g. ker‐ nel.percpu.syscall. Typically (although this is not a requirement) there would be at most one name for each PMID in a PMNS. For example kernel.all.cpu.idle and disk.dev.read are the unique names for two distinct performance metrics, each with a unique PMID. Groups of related PMIDs may be named by naming a non-leaf node in the PMNS tree, e.g. disk. The default local PMNS used by pmcd is located at $PCP_VAR_DIR/pmns/root however the envi‐ ronment variable PMNS_DEFAULT may be set to the full pathname of a different PMNS which will then be used as the default local PMNS. Most applications do not use the local PMNS directly, but rather import parts of the PMNS as required from the same place that performance metrics are fetched, i.e. from pmcd(1) for live monitoring or from a PCP archive for retrospective monitoring. To explore the PMNS use pminfo(1), or if the PCP GUI package is installed the New Chart and Metric Search windows within pmchart(1).
PERFORMANCE METRIC SPECIFICATIONSIn configuration files and (to a lesser extent) command line options, metric specifica‐ tions adhere to the following syntax rules. If the source of performance metrics is real-time from pmcd(1) then the accepted syntax is host:metric[instance1,instance2,...] If the source of performance metrics is a PCP archive log then the accepted syntax is archive/metric[instance1,instance2,...] The host:, archive/ and [instance1,instance2,...] components are all optional. The , delimiter in the list of instance names may be replaced by white space. Special characters in instance names may be escaped by surrounding the name in double quotes or preceding the character with a backslash. White space is ignored everywhere except within a quoted instance name. An empty instance is silently ignored, and in particular ``'' is the same as no instance, while ``[one,,,two]'' is parsed as specifying just the two instances ``one'' and ``two''. As a special case, if the host is the single character ``@'' then this refers to a PM_CON‐ TEXT_LOCAL source, see pmNewContext(3).
SECURE PMCD CONNECTIONSSince PCP version 3.6.11, a monitor can explicitly request a secure connection to a col‐ lector host running pmcd(1) or pmproxy(1) using the PM_CTXFLAG_SECURE context flag. If the PCP Collector host supports this feature - refer to the pmcd.feature.secure metric for confirmation of this - a TLS/SSL (Transport Layer Security or Secure Sockets Layer) con‐ nection can be established which uses public key cryptography and related techniques. These features aim to prevent eavesdropping and data tampering from a malicious third party, as well as providing server-side authentication (confident identification of a server by a client) which can be used to guard against man-in-the-middle attacks. A secure pmcd connection requires use of certificate-based authentication. The security features offered by pmcd and pmproxy are implemented using the Network Security Services (NSS) APIs and utilities. The NSS certutil tool can be used to create certificates suit‐ able for establishing trust between PCP monitor and collector hosts. A complete description is beyond the scope of this document, refer to the PCP ENVIRONMENT, FILES and SEE ALSO sections for detailed information. This includes links to tutorials on the steps involved in setting up the available security features.
PMCD HOST SPECIFICATIONIn the absence of an explicit host name specification, most tools will default to the local host in live update mode. In PCP releases since 3.8.4 onward, this results in an efficient local protocol being selected - typically a Unix domain socket. If this option is used (which can also be explicitly requested via the unix: host specification described below), it is important to note that all connections will be automatically authenticated. In other words, the credentials of the user invoking a client tool will automatically be made available to pmcd(1) and all of its PMDAs, on the users behalf, such that results can be customized to the privilege levels of individual users. Names of remote hosts running the pmcd(1) daemon can of course also be provided to request a remote host be used. The most basic form of pmcd host specification is a simple host name, possibly including the domain name if necessary. However, this can be extended in a number of ways to further refine attributes of the connection made to pmcd. The pmcd port number and also optional pmproxy(1) hostname and its port number, can be given as part of the host specification, since PCP version 3.0. These supersede (and override) the old-style PMCD_PORT, PMPROXY_HOST and PMPROXY_PORT environment variables. The following are valid hostname specifications that specify connections to pmcd on host nas1.servers.com with/without a list of ports, with/without a pmproxy(1) connection through a firewall, and with IPv6 and IPv4 addresses as shown. $ pcp -h nas1.servers.com:44321,@firewall.servers.com:44322 $ pcp -h nas1.servers.com:@firewall.servers.com:44322 $ pcp -h nas1.servers.com:@firewall.servers.com $ pcp -h @firewall.servers.com $ pcp -h nas1.servers.com:44321 $ pcp -h [fe80::2ad2:44ff:fe88:e4f1%p2p1] $ pcp -h 192.168.0.103 In addition, ``connection attributes'' can also be specified. These include username, password (can be given interactively and may depend on the authentication mechanism employed), whether to target a specific running container, whether to use secure (encrypted) or native (naked) protocol, and so on. The previous examples all default to native protocol, and use no authentication. This can be altered, as in the following examples. $ pcp -h pcps://app2.servers.com?container=cae8e6edc0d5 $ pcp -h pcps://nas1.servers.com:44321?username=tanya&method=gssapi $ pcp -h pcps://@firewalls.r.us?method=plain $ pcp -h pcp://nas3.servers.com $ pcp -h 192.168.0.103?container=cae8e6edc0d5,method=digest-md5 $ pcp -h unix: $ pcp -h local: The choice of authentication method, and other resulting parameters like username, option‐ ally password, etc, depends on the SASL2 configuration used by each (remote) pmcd. Tuto‐ rials are available specifying various aspects of configuring the authentication module(s) used, these fine details are outside the scope of this document. In all situations, host names can be used interchangeably with IPv4 or IPv6 addressing (directly), as shown above. In the case of an IPv6 address, the full address must be enclosed by square brackets and the scope (interface) must also be specified. The final local: example above is now the default for most tools. This connection is an automatically authenticated local host connection on all platforms that support Unix domain sockets. No password is required and authentication is automatic. This is also the most efficient (lowest overhead) communication channel available. The difference between unix: and local: is that the former is a strict Unix domain socket specification (connection fails if it cannot connect that way), whereas the latter has a more forgiving fallback to using localhost (i.e. a regular Inet socket connection is used when Unix domain socket connections are unavailable).
ENVIRONMENTIn addition to the PCP run-time environment and configuration variables described in the PCP ENVIRONMENT section below, the following environment variables apply to all installa‐ tions. PCP_CONSOLE When set, this changes the default console from /dev/tty (on Unix) or CON: (on Win‐ dows) to be the specified console. The special value of none can be used to indi‐ cate no console is available for use. This is used in places where console-based tools need to interact with the user, and in particular is used when authentication is being performed. PCP_DEBUG When set, this variable provides an alternate way to initialize the value used to control diagnostic and debug output (the default value is 0 to suppress this out‐ put). The value for $PCP_DEBUG should be a decimal integer, see pmdbg(1) for a description of the supported values. PCP_DERIVED_CONFIG When set, this variable defines a colon separated list of files and/or directories (the syntax is the same as for the $PATH variable for sh(1)). The components are expanded into a list of files as follows: if a component of $PCP_DERIVED_CONFIG is a file, then that file is added to the list, else if a component is a directory then recursive descent is used to enumerate all files below that directory and these are added to the list. Each file in the resulting list is assumed to contain definitions of derived met‐ rics as per the syntax described in pmLoadDerivedConfig(3), and these are loaded in order. Derived metrics may be used to extend the available metrics with new (derived) met‐ rics using simple arithmetic expressions. If PCP_DERIVED_CONFIG is set, the derived metric definitions are processed automat‐ ically as each new source of performance metrics is established (i.e. each time a pmNewContext(3) is called) or when requests are made against the PMNS. Any component in the $PCP_DERIVED_CONFIG list or the expanded list of files that is not a file, or is not a directory or is not accessible (due to permissions or a bad symbolic link) will be silently ignored. PCP_SECURE_SOCKETS When set, this variable forces any monitor tool connections to be established using the certificate-based secure sockets feature. If the connections cannot be estab‐ lished securely, they will fail. PCP_SECURE_DB_METHOD With secure socket connections, the certificate and key database is stored using the sql: method by default. Use PCP_SECURE_DB_METHOD to override the default, most usually setting the value to the empty string (for the older database methods). PCP_STDERR Many PCP tools support the environment variable PCP_STDERR, which can be used to control where error messages are sent. When unset, the default behavior is that ``usage'' messages and option parsing errors are reported on standard error, other messages after initial startup are sent to the default destination for the tool, i.e. standard error for ASCII tools, or a dialog for GUI tools. If PCP_STDERR is set to the literal value DISPLAY then all messages will be dis‐ played in a dialog. This is used for any tools launched from the a Desktop envi‐ ronment. If PCP_STDERR is set to any other value, the value is assumed to be a filename, and all messages will be written there. PMCD_CONNECT_TIMEOUT When attempting to connect to a remote pmcd(1) on a machine that is booting, the connection attempt could potentially block for a long time until the remote machine finishes its initialization. Most PCP applications and some of the PCP library routines will abort and return an error if the connection has not been established after some specified interval has elapsed. The default interval is 5 seconds. This may be modified by setting PMCD_CONNECT_TIMEOUT in the environment to a real number of seconds for the desired timeout. This is most useful in cases where the remote host is at the end of a slow network, requiring longer latencies to estab‐ lish the connection correctly. PMCD_RECONNECT_TIMEOUT When a monitor or client application loses a connection to a pmcd(1), the connec‐ tion may be re-established by calling a service routine in the PCP library. How‐ ever, attempts to reconnect are controlled by a back-off strategy to avoid flooding the network with reconnection requests. By default, the back-off delays are 5, 10, 20, 40 and 80 seconds for consecutive reconnection requests from a client (the last delay will be repeated for any further attempts after the fifth). Setting the environment variable PMCD_RECONNECT_TIMEOUT to a comma separated list of positive integers will re-define the back-off delays, e.g. setting PMCD_RECONNECT_TIMEOUT to ``1,2'' will back-off for 1 second, then attempt another connection request every 2 seconds thereafter. PMCD_REQUEST_TIMEOUT For monitor or client applications connected to pmcd(1), there is a possibility of the application "hanging" on a request for performance metrics or metadata or help text. These delays may become severe if the system running pmcd crashes, or the network connection is lost. By setting the environment variable PMCD_REQUEST_TIME‐ OUT to a number of seconds, requests to pmcd will timeout after this number of sec‐ onds. The default behavior is to be willing to wait 10 seconds for a response from every pmcd for all applications. PMCD_WAIT_TIMEOUT When pmcd(1) is started from $PCP_RC_DIR/pcp then the primary instance of pmlog‐ ger(1) will be started if the configuration flag pmlogger is chkconfig(8) enabled and pmcd is running and accepting connections. The check on pmcd's readiness will wait up to PMCD_WAIT_TIMEOUT seconds. If pmcd has a long startup time (such as on a very large system), then PMCD_WAIT_TIMEOUT can be set to provide a maximum wait longer than the default 60 seconds. PMNS_DEFAULT If set, then interpreted as the full pathname to be used as the default local PMNS for pmLoadNameSpace(3). Otherwise, the default local PMNS is located at $PCP_VAR_DIR/pcp/pmns/root for base PCP installations. PCP_COUNTER_WRAP Many of the performance metrics exported from PCP agents have the semantics of counter meaning they are expected to be monotonically increasing. Under some cir‐ cumstances, one value of these metrics may smaller than the previously fetched value. This can happen when a counter of finite precision overflows, or when the PCP agent has been reset or restarted, or when the PCP agent is exporting values from some underlying instrumentation that is subject to some asynchronous disconti‐ nuity. The environment variable PCP_COUNTER_WRAP may be set to indicate that all such cases of a decreasing ``counter'' should be treated as a counter overflow, and hence the values are assumed to have wrapped once in the interval between consecu‐ tive samples. This ``wrapping'' behavior was the default in earlier PCP versions, but by default has been disabled in PCP release from version 1.3 on. PMDA_PATH The PMDA_PATH environment variable may be used to modify the search path used by pmcd(1) and pmNewContext(3) (for PM_CONTEXT_LOCAL contexts) when searching for a daemon or DSO PMDA. The syntax follows that for PATH in sh(1), i.e. a colon sepa‐ rated list of directories, and the default search path is ``/var/pcp/lib:/usr/pcp/lib'', (or ``/var/lib/pcp/lib'' on Linux, depending on the value of the $PCP_VAR_DIR environment variable). PMCD_PORT The TPC/IP port(s) used by pmcd(1) to create the socket for incoming connections and requests, was historically 4321 and more recently the officially registered port 44321; in the current release, both port numbers are used by default as a transitional arrangement. This may be over-ridden by setting PMCD_PORT to a dif‐ ferent port number, or a comma-separated list of port numbers. If a non-default port is used when pmcd is started, then every monitoring application connecting to that pmcd must also have PMCD_PORT set in their environment before attempting a connection. The following environment variables are relevant to installations in which pmlogger(1), the PCP archive logger, is used. PMLOGGER_PORT The environment variable PMLOGGER_PORT may be used to change the base TCP/IP port number used by pmlogger(1) to create the socket to which pmlc(1) instances will try and connect. The default base port number is 4330. When used, PMLOGGER_PORT should be set in the environment before pmlogger is executed. PMLOGGER_REQUEST_TIMEOUT When pmlc(1) connects to pmlogger(1), there is a remote possibility of pmlc "hang‐ ing" on a request for information as a consequence of a failure of the network or pmlogger. By setting the environment variable PMLOGGER_REQUEST_TIMEOUT to a number of seconds, requests to pmlogger will timeout after this number of seconds. The default behavior is to be willing to wait forever for a response from each request to a pmlogger. When used, PMLOGGER_REQUEST_TIMEOUT should be set in the environ‐ ment before pmlc is executed. If you have the PCP product installed, then the following environment variables are rele‐ vant to the Performance Metrics Domain Agents (PMDAs). PMDA_LOCAL_PROC Use this variable has been deprecated and it is now ignored. If the ``proc'' PMDA is configured as a DSO for use with pmcd(1) on the local host then all of the ``proc'' metrics will be available to applications using a PM_CONTEXT_LOCAL con‐ text. The previous behaviour was that if this variable was set, then a context estab‐ lished with the type of PM_CONTEXT_LOCAL will have access to the ``proc'' PMDA to retrieve performance metrics about individual processes. PMDA_LOCAL_SAMPLE Use this variable has been deprecated and it is now ignored. If the ``sample'' PMDA is configured as a DSO for use with pmcd(1) on the local host then all of the ``sample'' metrics will be available to applications using a PM_CONTEXT_LOCAL con‐ text. The previous behaviour was that if this variable was set, then a context estab‐ lished with the type of PM_CONTEXT_LOCAL will have access to the ``sample'' PMDA if this optional PMDA has been installed locally. PMIECONF_PATH If set, pmieconf(1) will form its pmieconf(5) specification (set of parameterized pmie(1) rules) using all valid pmieconf files found below each subdirectory in this colon-separated list of subdirectories. If not set, the default is $PCP_VAR_DIR/config/pmieconf.
FILES/etc/pcp.conf Configuration file for the PCP runtime environment, see pcp.conf(5). /etc/pki/nssdb Optionally contains a Network Security Services database with a "PCP Collector" certificate providing trusted identification for the collector host. $HOME/.pcp User-specific directories containing configuration files for customisation of the various monitor tools, such as pmchart(1). $HOME/.pki/nssdb A shared Network Security Services (NSS) database directory containing per-user certificates identifying known valid remote pmcd collector hosts. The NSS cer‐ tutil tool is one of several that can be used to maintain this database. $PCP_RC_DIR/pcp Script for starting and stopping pmcd(1). $PCP_PMCDCONF_PATH Control file for pmcd(1). $PCP_PMCDOPTIONS_PATH Command line options passed to pmcd(1) when it is started from $PCP_RC_DIR/pcp. All the command line option lines should start with a hyphen as the first char‐ acter. This file can also contain environment variable settings of the form "VARIABLE=value". $PCP_BINADM_DIR Location of PCP utilities for collecting and maintaining PCP archives, PMDA help text, PMNS files etc. $PCP_PMDAS_DIR Parent directory of the installation directory for Dynamic Shared Object (DSO) PMDAs. $PCP_RUN_DIR/pmcd.pid If pmcd is running, this file contains an ascii decimal representation of its process ID. $PCP_LOG_DIR/pmcd Default location of log files for pmcd(1), current directory for running PMDAs. Archives generated by pmlogger(1) are generally below $PCP_LOG_DIR/pmlogger. $PCP_LOG_DIR/pmcd/pmcd.log Diagnostic and status log for the current running pmcd(1) process. The first place to look when there are problems associated with pmcd. $PCP_LOG_DIR/pmcd/pmcd.log.prev Diagnostic and status log for the previous pmcd(1) instance. $PCP_LOG_DIR/NOTICES Log of pmcd(1) and PMDA starts, stops, additions and removals. $PCP_VAR_DIR/config Contains directories of configuration files for several PCP tools. $PCP_SYSCONF_DIR/pmcd/rc.local Local script for controlling PCP boot, shutdown and restart actions. $PCP_VAR_DIR/pmns Directory containing the set of PMNS files for all installed PMDAs. $PCP_VAR_DIR/pmns/root The ASCII pmns(5) exported by pmcd(1) by default. This PMNS is be the super set of all other PMNS files installed in $PCP_VAR_DIR/pmns. In addition, if the PCP product is installed the following files and directories are rele‐ vant. $PCP_LOG_DIR/NOTICES In addition to the pmcd(1) and PMDA activity, may be used to log alarms and notices from pmie(1) via pmpost(1). $PCP_PMLOGGERCONTROL_PATH Control file for pmlogger(1) instances launched from $PCP_RC_DIR/pcp and/or managed by pmlogger_check(1) and pmlogger_daily(1) as part of a production PCP archive col‐ lection setup.
PCP ENVIRONMENTEnvironment variables with the prefix PCP_ are used to parameterize the file and directory names used by PCP. On each installation, the file /etc/pcp.conf contains the local values for these variables. The $PCP_CONF variable may be used to specify an alternative config‐ uration file, as described in pcp.conf(5).
Performance Co-Pilot PCP PCPINTRO(1)
SEE ALSOpmcd(1), pmie(1), pmie_daily(1), pminfo(1), pmlc(1), pmlogger(1), pmlogger_daily(1), pmstat(1), pmval(1), pcp(1), pcp.conf(5), pcp.env(5), pmns(5) and chkconfig(8). If the PCP GUI package is installed, then the following entries are also relevant: pmchart(1), pmtime(1), and pmdumptext(1). If the secure sockets extensions have been enabled, then the following references are also relevant: http://www.pcp.io/documentation.html http://www.mozilla.org/projects/security/pki/nss/#documentation http://www.mozilla.org/projects/security/pki/nss/tools/certutil.html Also refer to the books Performance Co-Pilot User's and Administrator's Guide and Perfor‐ mance Co-Pilot Programmer's Guide which can be found at http://www.pcp.io/
|This manual||Reference||Other manuals|
collectl2pcp(1) | mkaf(1) | mmv(5) | pcp(1) | pcp-archive(5) | pcp-collectl(1) | pcp-dmcache(1) | pcp-free(1) | pcp-iostat(1) | pcp-numastat(1) | pcp-python(1) | pcp-shping(1) | pcp-uptime(1) | pcp-verify(1) | pcp.conf(5) | pcp.env(5) | pcp2graphite(1) | PCP::PMDA(3pm) | PCPIntro(3) | PMAPI(3)
bzip2(1) | dash(1) | datetime(3) | gzip(1) | pcp(1) | pcp-archive(5) | pcp.conf(5) | pcp.env(5) | pmcd(1) | pmchart(1) | pmdbg(1) | pmdumptext(1) | pmie(1) | pmie_check(1) | pmieconf(1) | pmieconf(5) | pminfo(1) | pmlc(1) | pmLoadDerivedConfig(3) | pmLoadNameSpace(3)