SSHD(8) - man page online | administration and privileged commands
OpenSSH SSH daemon.
February 17, 2016
SSHD(8) BSD System Manager's Manual SSHD(8)
NAME sshd — OpenSSH SSH daemon SYNOPSIS sshd [-46DdeiqTt] [-b bits] [-C connection_spec] [-c host_certificate_file] [-E log_file] [-f config_file] [-g login_grace_time] [-h host_key_file] [-k key_gen_time] [-o option] [-p port] [-u len] DESCRIPTION sshd (OpenSSH Daemon) is the daemon program for ssh(1). Together these programs replace rlogin and rsh, and provide secure encrypted communications between two untrusted hosts over an insecure network. sshd listens for connections from clients. It is normally started at boot from /etc/init.d/ssh (or /etc/init/ssh.conf on systems using the Upstart init daemon). It forks a new daemon for each incoming connection. The forked daemons handle key exchange, encryp‐ tion, authentication, command execution, and data exchange. sshd can be configured using command-line options or a configuration file (by default sshd_config(5)); command-line options override values specified in the configuration file. sshd rereads its configuration file when it receives a hangup signal, SIGHUP, by executing itself with the name and options it was started with, e.g. /usr/sbin/sshd. The options are as follows: -4 Forces sshd to use IPv4 addresses only. -6 Forces sshd to use IPv6 addresses only. -b bits Specifies the number of bits in the ephemeral protocol version 1 server key (default 1024). -C connection_spec Specify the connection parameters to use for the -T extended test mode. If pro‐ vided, any Match directives in the configuration file that would apply to the speci‐ fied user, host, and address will be set before the configuration is written to standard output. The connection parameters are supplied as keyword=value pairs. The keywords are “user”, “host”, “laddr”, “lport”, and “addr”. All are required and may be supplied in any order, either with multiple -C options or as a comma-sepa‐ rated list. -c host_certificate_file Specifies a path to a certificate file to identify sshd during key exchange. The certificate file must match a host key file specified using the -h option or the HostKey configuration directive. -D When this option is specified, sshd will not detach and does not become a daemon. This allows easy monitoring of sshd. -d Debug mode. The server sends verbose debug output to standard error, and does not put itself in the background. The server also will not fork and will only process one connection. This option is only intended for debugging for the server. Multi‐ ple -d options increase the debugging level. Maximum is 3. -E log_file Append debug logs to log_file instead of the system log. -e Write debug logs to standard error instead of the system log. -f config_file Specifies the name of the configuration file. The default is /etc/ssh/sshd_config. sshd refuses to start if there is no configuration file. -g login_grace_time Gives the grace time for clients to authenticate themselves (default 120 seconds). If the client fails to authenticate the user within this many seconds, the server disconnects and exits. A value of zero indicates no limit. -h host_key_file Specifies a file from which a host key is read. This option must be given if sshd is not run as root (as the normal host key files are normally not readable by anyone but root). The default is /etc/ssh/ssh_host_key for protocol version 1, and /etc/ssh/ssh_host_dsa_key, /etc/ssh/ssh_host_ecdsa_key. /etc/ssh/ssh_host_ed25519_key and /etc/ssh/ssh_host_rsa_key for protocol version 2. It is possible to have multiple host key files for the different protocol versions and host key algorithms. -i Specifies that sshd is being run from inetd(8). If SSH protocol 1 is enabled, sshd should not normally be run from inetd because it needs to generate the server key before it can respond to the client, and this may take some time. Clients may have to wait too long if the key was regenerated every time. -k key_gen_time Specifies how often the ephemeral protocol version 1 server key is regenerated (default 3600 seconds, or one hour). The motivation for regenerating the key fairly often is that the key is not stored anywhere, and after about an hour it becomes impossible to recover the key for decrypting intercepted communications even if the machine is cracked into or physically seized. A value of zero indicates that the key will never be regenerated. -o option Can be used to give options in the format used in the configuration file. This is useful for specifying options for which there is no separate command-line flag. For full details of the options, and their values, see sshd_config(5). -p port Specifies the port on which the server listens for connections (default 22). Multi‐ ple port options are permitted. Ports specified in the configuration file with the Port option are ignored when a command-line port is specified. Ports specified using the ListenAddress option override command-line ports. -q Quiet mode. Nothing is sent to the system log. Normally the beginning, authentica‐ tion, and termination of each connection is logged. -T Extended test mode. Check the validity of the configuration file, output the effec‐ tive configuration to stdout and then exit. Optionally, Match rules may be applied by specifying the connection parameters using one or more -C options. -t Test mode. Only check the validity of the configuration file and sanity of the keys. This is useful for updating sshd reliably as configuration options may change. -u len This option is used to specify the size of the field in the utmp structure that holds the remote host name. If the resolved host name is longer than len, the dot‐ ted decimal value will be used instead. This allows hosts with very long host names that overflow this field to still be uniquely identified. Specifying -u0 indicates that only dotted decimal addresses should be put into the utmp file. -u0 may also be used to prevent sshd from making DNS requests unless the authentication mechanism or configuration requires it. Authentication mechanisms that may require DNS include RhostsRSAAuthentication, HostbasedAuthentication, and using a from="pattern-list" option in a key file. Configuration options that require DNS include using a USER@HOST pattern in AllowUsers or DenyUsers. AUTHENTICATION The OpenSSH SSH daemon supports SSH protocols 1 and 2. The default is to use protocol 2 only, though this can be changed via the Protocol option in sshd_config(5). Protocol 1 should not be used and is only offered to support legacy devices. Each host has a host-specific key, used to identify the host. Partial forward security for protocol 1 is provided through an additional server key, normally 1024 bits, generated when the server starts. This key is normally regenerated every hour if it has been used, and is never stored on disk. Whenever a client connects, the daemon responds with its public host and server keys. The client compares the RSA host key against its own database to verify that it has not changed. The client then generates a 256-bit random number. It encrypts this random number using both the host key and the server key, and sends the encrypted num‐ ber to the server. Both sides then use this random number as a session key which is used to encrypt all further communications in the session. The rest of the session is encrypted using a conventional cipher, currently Blowfish or 3DES, with 3DES being used by default. The client selects the encryption algorithm to use from those offered by the server. For protocol 2, forward security is provided through a Diffie-Hellman key agreement. This key agreement results in a shared session key. The rest of the session is encrypted using a symmetric cipher, currently 128-bit AES, Blowfish, 3DES, CAST128, Arcfour, 192-bit AES, or 256-bit AES. The client selects the encryption algorithm to use from those offered by the server. Additionally, session integrity is provided through a cryptographic message authen‐ tication code (hmac-md5, hmac-sha1, umac-64, umac-128, hmac-ripemd160, hmac-sha2-256 or hmac-sha2-512). Finally, the server and the client enter an authentication dialog. The client tries to authenticate itself using host-based authentication, public key authentication, challenge- response authentication, or password authentication. Regardless of the authentication type, the account is checked to ensure that it is accessi‐ ble. An account is not accessible if it is locked, listed in DenyUsers or its group is listed in DenyGroups . The definition of a locked account is system dependant. Some plat‐ forms have their own account database (eg AIX) and some modify the passwd field ( ‘*LK*’ on Solaris and UnixWare, ‘*’ on HP-UX, containing ‘Nologin’ on Tru64, a leading ‘*LOCKED*’ on FreeBSD and a leading ‘!’ on most Linuxes). If there is a requirement to disable password authentication for the account while allowing still public-key, then the passwd field should be set to something other than these values (eg ‘NP’ or ‘*NP*’ ). If the client successfully authenticates itself, a dialog for preparing the session is entered. At this time the client may request things like allocating a pseudo-tty, forward‐ ing X11 connections, forwarding TCP connections, or forwarding the authentication agent con‐ nection over the secure channel. After this, the client either requests a shell or execution of a command. The sides then enter session mode. In this mode, either side may send data at any time, and such data is forwarded to/from the shell or command on the server side, and the user terminal in the client side. When the user program terminates and all forwarded X11 and other connections have been closed, the server sends command exit status to the client, and both sides exit. LOGIN PROCESS When a user successfully logs in, sshd does the following: 1. If the login is on a tty, and no command has been specified, prints last login time and /etc/motd (unless prevented in the configuration file or by ~/.hushlogin; see the FILES section). 2. If the login is on a tty, records login time. 3. Checks /etc/nologin; if it exists, prints contents and quits (unless root). 4. Changes to run with normal user privileges. 5. Sets up basic environment. 6. Reads the file ~/.ssh/environment, if it exists, and users are allowed to change their environment. See the PermitUserEnvironment option in sshd_config(5). 7. Changes to user's home directory. 8. If ~/.ssh/rc exists and the sshd_config(5) PermitUserRC option is set, runs it; else if /etc/ssh/sshrc exists, runs it; otherwise runs xauth. The “rc” files are given the X11 authentication protocol and cookie in standard input. See SSHRC, below. 9. Runs user's shell or command. All commands are run under the user's login shell as specified in the system password database. SSHRC If the file ~/.ssh/rc exists, sh(1) runs it after reading the environment files but before starting the user's shell or command. It must not produce any output on stdout; stderr must be used instead. If X11 forwarding is in use, it will receive the "proto cookie" pair in its standard input (and DISPLAY in its environment). The script must call xauth(1) because sshd will not run xauth automatically to add X11 cookies. The primary purpose of this file is to run any initialization routines which may be needed before the user's home directory becomes accessible; AFS is a particular example of such an environment. This file will probably contain some initialization code followed by something similar to: if read proto cookie && [ -n "$DISPLAY" ]; then if [ `echo $DISPLAY | cut -c1-10` = 'localhost:' ]; then # X11UseLocalhost=yes echo add unix:`echo $DISPLAY | cut -c11-` $proto $cookie else # X11UseLocalhost=no echo add $DISPLAY $proto $cookie fi | xauth -q - fi If this file does not exist, /etc/ssh/sshrc is run, and if that does not exist either, xauth is used to add the cookie. SSH_KNOWN_HOSTS FILE FORMAT The /etc/ssh/ssh_known_hosts and ~/.ssh/known_hosts files contain host public keys for all known hosts. The global file should be prepared by the administrator (optional), and the per-user file is maintained automatically: whenever the user connects from an unknown host, its key is added to the per-user file. Each line in these files contains the following fields: markers (optional), hostnames, bits, exponent, modulus, comment. The fields are separated by spaces. The marker is optional, but if it is present then it must be one of “@cert-authority”, to indicate that the line contains a certification authority (CA) key, or “@revoked”, to indi‐ cate that the key contained on the line is revoked and must not ever be accepted. Only one marker should be used on a key line. Hostnames is a comma-separated list of patterns (‘*’ and ‘?’ act as wildcards); each pattern in turn is matched against the canonical host name (when authenticating a client) or against the user-supplied name (when authenticating a server). A pattern may also be preceded by ‘!’ to indicate negation: if the host name matches a negated pattern, it is not accepted (by that line) even if it matched another pattern on the line. A hostname or address may optionally be enclosed within ‘[’ and ‘]’ brackets then followed by ‘:’ and a non-standard port number. Alternately, hostnames may be stored in a hashed form which hides host names and addresses should the file's contents be disclosed. Hashed hostnames start with a ‘|’ character. Only one hashed hostname may appear on a single line and none of the above negation or wildcard operators may be applied. Bits, exponent, and modulus are taken directly from the RSA host key; they can be obtained, for example, from /etc/ssh/ssh_host_key.pub. The optional comment field continues to the end of the line, and is not used. Lines starting with ‘#’ and empty lines are ignored as comments. When performing host authentication, authentication is accepted if any matching line has the proper key; either one that matches exactly or, if the server has presented a certificate for authentication, the key of the certification authority that signed the certificate. For a key to be trusted as a certification authority, it must use the “@cert-authority” marker described above. The known hosts file also provides a facility to mark keys as revoked, for example when it is known that the associated private key has been stolen. Revoked keys are specified by including the “@revoked” marker at the beginning of the key line, and are never accepted for authentication or as certification authorities, but instead will produce a warning from ssh(1) when they are encountered. It is permissible (but not recommended) to have several lines or different host keys for the same names. This will inevitably happen when short forms of host names from different domains are put in the file. It is possible that the files contain conflicting information; authentication is accepted if valid information can be found from either file. Note that the lines in these files are typically hundreds of characters long, and you defi‐ nitely don't want to type in the host keys by hand. Rather, generate them by a script, ssh-keyscan(1) or by taking /etc/ssh/ssh_host_key.pub and adding the host names at the front. ssh-keygen(1) also offers some basic automated editing for ~/.ssh/known_hosts including removing hosts matching a host name and converting all host names to their hashed representations. An example ssh_known_hosts file: # Comments allowed at start of line closenet,...,192.0.2.53 1024 37 159...93 closenet.example.net cvs.example.net,192.0.2.10 ssh-rsa AAAA1234.....= # A hashed hostname |1|JfKTdBh7rNbXkVAQCRp4OQoPfmI=|USECr3SWf1JUPsms5AqfD5QfxkM= ssh-rsa AAAA1234.....= # A revoked key @revoked * ssh-rsa AAAAB5W... # A CA key, accepted for any host in *.mydomain.com or *.mydomain.org @cert-authority *.mydomain.org,*.mydomain.com ssh-rsa AAAAB5W... FILES ~/.hushlogin This file is used to suppress printing the last login time and /etc/motd, if PrintLastLog and PrintMotd, respectively, are enabled. It does not suppress print‐ ing of the banner specified by Banner. ~/.rhosts This file is used for host-based authentication (see ssh(1) for more information). On some machines this file may need to be world-readable if the user's home direc‐ tory is on an NFS partition, because sshd reads it as root. Additionally, this file must be owned by the user, and must not have write permissions for anyone else. The recommended permission for most machines is read/write for the user, and not acces‐ sible by others. ~/.shosts This file is used in exactly the same way as .rhosts, but allows host-based authen‐ tication without permitting login with rlogin/rsh. ~/.ssh/ This directory is the default location for all user-specific configuration and authentication information. There is no general requirement to keep the entire con‐ tents of this directory secret, but the recommended permissions are read/write/exe‐ cute for the user, and not accessible by others. ~/.ssh/authorized_keys Lists the public keys (DSA, ECDSA, Ed25519, RSA) that can be used for logging in as this user. The format of this file is described above. The content of the file is not highly sensitive, but the recommended permissions are read/write for the user, and not accessible by others. If this file, the ~/.ssh directory, or the user's home directory are writable by other users, then the file could be modified or replaced by unauthorized users. In this case, sshd will not allow it to be used unless the StrictModes option has been set to “no”. ~/.ssh/environment This file is read into the environment at login (if it exists). It can only contain empty lines, comment lines (that start with ‘#’), and assignment lines of the form name=value. The file should be writable only by the user; it need not be readable by anyone else. Environment processing is disabled by default and is controlled via the PermitUserEnvironment option. ~/.ssh/known_hosts Contains a list of host keys for all hosts the user has logged into that are not already in the systemwide list of known host keys. The format of this file is described above. This file should be writable only by root/the owner and can, but need not be, world-readable. ~/.ssh/rc Contains initialization routines to be run before the user's home directory becomes accessible. This file should be writable only by the user, and need not be readable by anyone else. /etc/hosts.allow /etc/hosts.deny Access controls that should be enforced by tcp-wrappers are defined here. Further details are described in hosts_access(5). /etc/hosts.equiv This file is for host-based authentication (see ssh(1)). It should only be writable by root. /etc/ssh/moduli Contains Diffie-Hellman groups used for the "Diffie-Hellman Group Exchange" key exchange method. The file format is described in moduli(5). If no usable groups are found in this file then fixed internal groups will be used. /etc/motd See motd(5). /etc/nologin If this file exists, sshd refuses to let anyone except root log in. The contents of the file are displayed to anyone trying to log in, and non-root connections are refused. The file should be world-readable. /etc/ssh/shosts.equiv This file is used in exactly the same way as hosts.equiv, but allows host-based authentication without permitting login with rlogin/rsh. /etc/ssh/ssh_host_key /etc/ssh/ssh_host_dsa_key /etc/ssh/ssh_host_ecdsa_key /etc/ssh/ssh_host_ed25519_key /etc/ssh/ssh_host_rsa_key These files contain the private parts of the host keys. These files should only be owned by root, readable only by root, and not accessible to others. Note that sshd does not start if these files are group/world-accessible. /etc/ssh/ssh_host_key.pub /etc/ssh/ssh_host_dsa_key.pub /etc/ssh/ssh_host_ecdsa_key.pub /etc/ssh/ssh_host_ed25519_key.pub /etc/ssh/ssh_host_rsa_key.pub These files contain the public parts of the host keys. These files should be world- readable but writable only by root. Their contents should match the respective pri‐ vate parts. These files are not really used for anything; they are provided for the convenience of the user so their contents can be copied to known hosts files. These files are created using ssh-keygen(1). /etc/ssh/ssh_known_hosts Systemwide list of known host keys. This file should be prepared by the system administrator to contain the public host keys of all machines in the organization. The format of this file is described above. This file should be writable only by root/the owner and should be world-readable. /etc/ssh/sshd_config Contains configuration data for sshd. The file format and configuration options are described in sshd_config(5). /etc/ssh/sshrc Similar to ~/.ssh/rc, it can be used to specify machine-specific login-time initial‐ izations globally. This file should be writable only by root, and should be world- readable. /var/run/sshd chroot(2) directory used by sshd during privilege separation in the pre-authentica‐ tion phase. The directory should not contain any files and must be owned by root and not group or world-writable. /var/run/sshd.pid Contains the process ID of the sshd listening for connections (if there are several daemons running concurrently for different ports, this contains the process ID of the one started last). The content of this file is not sensitive; it can be world- readable. SEE ALSO scp(1), sftp(1), ssh(1), ssh-add(1), ssh-agent(1), ssh-keygen(1), ssh-keyscan(1), chroot(2), hosts_access(5), moduli(5), sshd_config(5), inetd(8), sftp-server(8)BSD February 17, 2016 BSD
|This manual||Reference||Other manuals|
afpd.conf(5) | apparmor.d(5) | cloud-sandbox(1) | Config::Model::Manual::ModelCreationIntroduction(3pm) | Config::Model::models::Ssh::HostElement(3pm) | Config::Model::models::Sshd(3pm) | Config::Model::models::Sshd::MatchElement(3pm) | Config::Model::models::SystemSsh(3pm) | hg-ssh(8) | ltsp-update-sshkeys(8) | moduli(5) | monkeysphere-authentication(8) | monkeysphere-host(8) | Net::OpenSSH(3pm) | Net::SSH2::KnownHosts(3pm) | pam_duo(8) | pts(4) | reptyr(1) | rootd(1) | rssh(1)
|refer to||chroot(2) | dash(1) | hosts_access(5) | inetd(8) | moduli(5) | motd(5) | scp(1) | sftp(1) | sftp-server(8) | ssh(1) | ssh-add(1) | ssh-agent(1) | ssh-keygen(1) | ssh-keyscan(1) | ssh_config(5) | sshd_config(5) | tun(4freebsd) | xauth(1)|